From 7958276c9f0d230053520ba20f2a00f5ecda18e4 Mon Sep 17 00:00:00 2001
From: salmonik <salmonik@tuta.io>
Date: Sun, 1 Nov 2026 15:53:29 +0100
Subject: scripts: rebuild the dev loop around build.sh/run.sh
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

`make` did not parse at all (missing separator at line 139), so every
make target was dead.  The folder also carried three overlapping
launchers (boot.sh, qemu.sh, boot-image.sh) plus a fourth partial one
in the Makefile, `cargo build --package rsdos` copy-pasted eight times,
the QEMU invocation copy-pasted per script, and the test helpers
(fail/wait_log/wait_qemu_exit/qemu_hmp) duplicated in five tests.

New layout:
- scripts/lib.sh: single config (image, OVMF, mem/smp), the one cargo
  invocation (build_all), the one QEMU shape (qemu_args), and the test
  harness (test_boot, wait_log, wait_qemu_exit, qemu_hmp, sendkeys)
- scripts/build.sh: kernel + every bins/* in one pass
- scripts/mksystem.sh: freshness-aware image build that now stages
  every bins/*.efi into /bin/cli|gui (they were never copied before)
- scripts/run.sh: build + stage + boot in one command; --headless,
  --debug (GDB stub), --monitor (HMP socket), --fresh, --mem/--smp/
  --bios/--image; on Wayland it auto-selects XWayland plus
  grab-on-hover so the mouse can be captured (Ctrl+Alt+G toggles)
- scripts/tests/: the five automated tests on the shared harness
- deleted: boot.sh, qemu.sh, boot-image.sh, lib-boot-args.sh,
  build-image-release.sh, build-bootloader.sh (rsboot chain dropped)

The Makefile is now a thin wrapper: make run, make test, make system,
make inspect, make help.  Two-command flow: ./scripts/build.sh then
./scripts/run.sh (run.sh alone also works).

Stale test assumptions fixed so the suite is green again: test-gfx
waited for "gfx: check" while the shell prints "gfx check: PASS";
test-mouse/test-msg hardcoded msgrecv = task 3 (wm-input took slot 3 —
ids are parsed from the log now); the queue-full probe targeted task 0,
whose exec pump drains its own queue as completion codes (moved to the
cursor task, which never recvs).

Verified in QEMU: make test -> test-disk, test-gfx, test-mouse,
test-msg, test-fault all PASS.
---
 scripts/boot-image.sh          |  65 ----------------
 scripts/boot.sh                |  90 ----------------------
 scripts/build-bootloader.sh    |  35 ---------
 scripts/build-image-release.sh |  30 --------
 scripts/build.sh               |  49 ++++++++++++
 scripts/debug-kernel.py        |  16 ++--
 scripts/lib-boot-args.sh       |  38 ----------
 scripts/lib.sh                 | 168 +++++++++++++++++++++++++++++++++++++++++
 scripts/mksystem.sh            | 144 ++++++++++++++++++-----------------
 scripts/qemu.sh                |  99 ------------------------
 scripts/run.sh                 | 142 ++++++++++++++++++++++++++++++++++
 scripts/sendkeys.py            | 103 -------------------------
 scripts/test-disk.sh           | 131 --------------------------------
 scripts/test-fault.sh          |  85 ---------------------
 scripts/test-focus.py          |  56 --------------
 scripts/test-gfx.sh            |  84 ---------------------
 scripts/test-mouse.sh          | 125 ------------------------------
 scripts/test-msg.sh            | 140 ----------------------------------
 scripts/tests/sendkeys.py      | 105 ++++++++++++++++++++++++++
 scripts/tests/test-disk.sh     |  67 ++++++++++++++++
 scripts/tests/test-fault.sh    |  47 ++++++++++++
 scripts/tests/test-focus.py    |  57 ++++++++++++++
 scripts/tests/test-gfx.sh      |  37 +++++++++
 scripts/tests/test-mouse.sh    |  83 ++++++++++++++++++++
 scripts/tests/test-msg.sh      |  98 ++++++++++++++++++++++++
 25 files changed, 937 insertions(+), 1157 deletions(-)
 delete mode 100755 scripts/boot-image.sh
 delete mode 100755 scripts/boot.sh
 delete mode 100755 scripts/build-bootloader.sh
 delete mode 100755 scripts/build-image-release.sh
 create mode 100755 scripts/build.sh
 delete mode 100644 scripts/lib-boot-args.sh
 create mode 100644 scripts/lib.sh
 delete mode 100755 scripts/qemu.sh
 create mode 100755 scripts/run.sh
 delete mode 100755 scripts/sendkeys.py
 delete mode 100755 scripts/test-disk.sh
 delete mode 100755 scripts/test-fault.sh
 delete mode 100755 scripts/test-focus.py
 delete mode 100755 scripts/test-gfx.sh
 delete mode 100755 scripts/test-mouse.sh
 delete mode 100755 scripts/test-msg.sh
 create mode 100755 scripts/tests/sendkeys.py
 create mode 100755 scripts/tests/test-disk.sh
 create mode 100755 scripts/tests/test-fault.sh
 create mode 100755 scripts/tests/test-focus.py
 create mode 100755 scripts/tests/test-gfx.sh
 create mode 100755 scripts/tests/test-mouse.sh
 create mode 100755 scripts/tests/test-msg.sh

(limited to 'scripts')

diff --git a/scripts/boot-image.sh b/scripts/boot-image.sh
deleted file mode 100755
index f70dcd4..0000000
--- a/scripts/boot-image.sh
+++ /dev/null
@@ -1,65 +0,0 @@
-#!/usr/bin/env bash
-#
-# scripts/boot-image.sh — boot rs-dos full chain disk image in QEMU
-#
-# Builds the image first if needed, then boots with UEFI firmware through
-# the real boot chain: firmware → rsboot → rsnix kernel.
-#
-# Usage:
-#   ./scripts/boot-image.sh [--gui] [--debug] [--mem 512M] [--smp 2]
-#
-# Keybindings:
-#   Ctrl-A X   — quit
-#   Ctrl-A C   — QEMU monitor
-#
-# Environment:
-#   OVMF    path to OVMF firmware (default: /usr/share/edk2/x64/OVMF.4m.fd)
-#   MEM     memory size (default: 256M)
-#   SMP     CPU count (default: 1)
-#
-set -euo pipefail
-
-SCRIPT_DIR="$(cd "$(dirname "$0")" && pwd)"
-PROJECT_DIR="$(cd "$SCRIPT_DIR/.." && pwd)"
-cd "$PROJECT_DIR"
-
-IMAGE="${1:-rs-dos.img}"
-
-# ---- config ----
-OVMF="${OVMF:-/usr/share/edk2/x64/OVMF.4m.fd}"
-MEM="${MEM:-256M}"
-SMP="${SMP:-1}"
-GUI=""
-DEBUG=""
-
-# ---- args ----
-source "$SCRIPT_DIR/lib-boot-args.sh"
-parse_boot_args "$@"
-
-# ---- build image if missing ----
-if [ ! -f "$IMAGE" ]; then
-	echo "Image not found, building..."
-	"$SCRIPT_DIR/mksystem.sh" --chain --gpt "$IMAGE"
-fi
-
-# ---- boot ----
-echo ""
-echo "=== Booting (full chain: firmware → rsboot → rsnix) ==="
-echo "  image:  $IMAGE"
-echo "  ovmf:   $OVMF"
-echo "  mem:    $MEM   smp: $SMP"
-echo "  gui:    $([ -n "$GUI" ] && echo yes || echo no)"
-echo "  gdb:    $([ -n "$DEBUG" ] && echo ':1234' || echo off)"
-echo ""
-
-exec qemu-system-x86_64 \
-	-bios "$OVMF" \
-	-drive file="$IMAGE",format=raw,if=none,id=hd \
-	-device ide-hd,drive=hd \
-	-serial stdio \
-	-m "$MEM" \
-	-machine q35 \
-	-cpu qemu64 \
-	-no-reboot \
-	-smp "$SMP" \
-	$GUI $DEBUG
diff --git a/scripts/boot.sh b/scripts/boot.sh
deleted file mode 100755
index cb017d8..0000000
--- a/scripts/boot.sh
+++ /dev/null
@@ -1,90 +0,0 @@
-#!/usr/bin/env bash
-#
-# scripts/boot.sh — quick direct boot in QEMU (dev loop)
-#
-# Builds the kernel, stages the system image, and boots directly as
-# BOOTX64.EFI via QEMU's FAT driver.  One image = one drive.
-#
-# Usage:
-#   ./scripts/boot.sh [--gui] [--debug] [--release] [--mem 512M] [--smp 2]
-#
-# Boot chain:  firmware → rsnix (direct)
-# Full chain:  use ./scripts/boot-image.sh (firmware → rsboot → rsnix)
-#
-# Keybindings:
-#   Ctrl-A X   — quit
-#   Ctrl-A C   — QEMU monitor
-#
-# Environment:
-#   OVMF    path to OVMF firmware (default: /usr/share/edk2/x64/OVMF.4m.fd)
-#   MEM     memory size (default: 256M)
-#   SMP     CPU count (default: 1)
-#   SYSTEM_IMG  system image path (default: /tmp/system.img)
-#
-set -euo pipefail
-
-SCRIPT_DIR="$(cd "$(dirname "$0")" && pwd)"
-PROJECT_DIR="$(cd "$SCRIPT_DIR/.." && pwd)"
-cd "$PROJECT_DIR"
-
-# ---- config ----
-OVMF="${OVMF:-/usr/share/edk2/x64/OVMF.4m.fd}"
-MEM="${MEM:-256M}"
-SMP="${SMP:-1}"
-SYSTEM_IMG="${SYSTEM_IMG:-/tmp/system.img}"
-PROFILE="release"
-
-GUI=""
-DEBUG=""
-
-# ---- args ----
-source "$SCRIPT_DIR/lib-boot-args.sh"
-handle_arg() {
-	case "$1" in
-	--debug)
-		PROFILE="debug"
-		CARGO_FLAGS=""
-		;;
-	*)
-		echo "unknown: $1"
-		exit 1
-		;;
-	esac
-}
-parse_boot_args "$@"
-
-OUT_DIR="target/x86_64-unknown-uefi/$PROFILE"
-
-# ---- build ----
-echo "=== Building kernel ($PROFILE) ==="
-if [ "$PROFILE" = "release" ]; then
-	cargo build --release --package rsdos --target x86_64-unknown-uefi
-else
-	cargo build --package rsdos --target x86_64-unknown-uefi
-fi
-
-# ---- stage system image ----
-echo "=== Staging system image ==="
-"$SCRIPT_DIR/mksystem.sh" --force "$SYSTEM_IMG"
-echo "  system image: $SYSTEM_IMG"
-
-# ---- boot ----
-echo ""
-echo "=== Booting (direct: firmware → rsnix) ==="
-echo "  ovmf:  $OVMF"
-echo "  mem:   $MEM   smp: $SMP"
-echo "  gui:   $([ -n "$GUI" ] && echo yes || echo no)"
-echo "  gdb:   $([ -n "$DEBUG" ] && echo ':1234' || echo off)"
-echo ""
-
-exec qemu-system-x86_64 \
-	-bios "$OVMF" \
-	-drive "file=$SYSTEM_IMG,format=raw,if=none,id=disk" \
-	-device ide-hd,drive=disk,bus=ide.0 \
-	-serial stdio \
-	-m "$MEM" \
-	-machine q35 \
-	-cpu qemu64 \
-	-no-reboot \
-	-smp "$SMP" \
-	$GUI $DEBUG
diff --git a/scripts/build-bootloader.sh b/scripts/build-bootloader.sh
deleted file mode 100755
index f0f0ce7..0000000
--- a/scripts/build-bootloader.sh
+++ /dev/null
@@ -1,35 +0,0 @@
-#!/usr/bin/env bash
-#
-# scripts/build-bootloader.sh — build rsboot (UEFI bootloader)
-#
-# rsboot is a git submodule at rsboot/.  This builds it and places
-# BOOTX64.EFI into build/bootloader/.
-#
-# Usage:
-#   ./scripts/build-bootloader.sh
-#
-# Output:
-#   build/bootloader/BOOTX64.EFI
-#
-set -euo pipefail
-
-SCRIPT_DIR="$(cd "$(dirname "$0")" && pwd)"
-PROJECT_DIR="$(dirname "$SCRIPT_DIR")"
-BUILD_DIR="$PROJECT_DIR/build"
-BOOTLOADER_DIR="$BUILD_DIR/bootloader"
-
-echo "=== Building rsboot (UEFI bootloader) ==="
-
-# Ensure submodule is checked out, tracking the latest upstream HEAD
-# (--remote fetches and checks out the newest main instead of reverting
-# to the commit recorded in the superproject's gitlink).
-cd "$PROJECT_DIR"
-git submodule update --init --remote rsboot
-
-cd "$PROJECT_DIR/rsboot"
-make clean 2>/dev/null || true
-make -j"$(nproc)" 2>&1 | sed 's/^/  /'
-
-echo ""
-echo "=== rsboot build complete ==="
-ls -lh "$BOOTLOADER_DIR/BOOTX64.EFI"
diff --git a/scripts/build-image-release.sh b/scripts/build-image-release.sh
deleted file mode 100755
index e4c5250..0000000
--- a/scripts/build-image-release.sh
+++ /dev/null
@@ -1,30 +0,0 @@
-#!/usr/bin/env bash
-#
-# scripts/build-image-release.sh — build the release GPT disk image
-#
-# Produces a single dd-able system image with the release build of
-# the kernel, rsboot bootloader, and all binaries in /bin/.
-#
-# Usage:
-#   ./scripts/build-image-release.sh [output.img]
-#
-set -euo pipefail
-
-SCRIPT_DIR="$(cd "$(dirname "$0")" && pwd)"
-PROJECT_DIR="$(cd "$SCRIPT_DIR/.." && pwd)"
-cd "$PROJECT_DIR"
-
-IMAGE="${1:-rs-dos.img}"
-
-echo "=== Building release kernel ==="
-cargo build --release --package rsdos --target x86_64-unknown-uefi
-
-echo "=== Building system image (chain + GPT) ==="
-"$SCRIPT_DIR/mksystem.sh" --chain --gpt "$IMAGE"
-
-echo ""
-echo "=== Done: $IMAGE ==="
-ls -lh "$IMAGE"
-echo ""
-echo "Boot with:  ./scripts/boot-image.sh --gui"
-echo "USB:        sudo dd if=$IMAGE of=/dev/sdX bs=4M status=progress"
diff --git a/scripts/build.sh b/scripts/build.sh
new file mode 100755
index 0000000..71430a4
--- /dev/null
+++ b/scripts/build.sh
@@ -0,0 +1,49 @@
+#!/usr/bin/env bash
+#
+# scripts/build.sh — compile the kernel and every external binary.
+#
+# The only cargo invocation in the project.  One pass builds the kernel
+# (rsdos.efi) and all /bin binaries (bins/*.efi), which is exactly what
+# the system image stages.
+#
+# Usage:
+#   ./scripts/build.sh            release (default — what the image uses)
+#   ./scripts/build.sh --debug    debug profile (slower guest, GDB symbols)
+#   ./scripts/build.sh --help
+#
+# Output:
+#   target/x86_64-unknown-uefi/<profile>/rsdos.efi   kernel
+#   target/x86_64-unknown-uefi/<profile>/<name>.efi  /bin binaries
+#
+# Typical flow:
+#   ./scripts/build.sh && ./scripts/run.sh
+#
+set -euo pipefail
+
+usage() {
+	awk 'NR > 1 && /^#/ { sub(/^# ?/, ""); print; next } NR > 1 { exit }' "$0"
+}
+
+# PROFILE is read by lib.sh (it derives OUT_DIR/KERNEL from it), so parse
+# before sourcing.
+while [ $# -gt 0 ]; do
+	case "$1" in
+	--debug) PROFILE="debug" ;;
+	--release) PROFILE="release" ;;
+	--help | -h)
+		usage
+		exit 0
+		;;
+	*)
+		echo "build.sh: unknown argument: $1" >&2
+		exit 1
+		;;
+	esac
+	shift
+done
+
+# shellcheck source=lib.sh
+source "$(dirname "$0")/lib.sh"
+
+build_all
+echo "kernel: $KERNEL"
diff --git a/scripts/debug-kernel.py b/scripts/debug-kernel.py
index c794ad6..c675045 100755
--- a/scripts/debug-kernel.py
+++ b/scripts/debug-kernel.py
@@ -2,20 +2,22 @@
 GDB Python script for debugging raisernics under QEMU.
 
 Usage:
-  1. Terminal 1: ./tools/qemu.sh --debug
-  2. Terminal 2: gdb -x tools/debug-kernel.py target/x86_64-unknown-uefi/debug/raisernics.efi
+  1. Terminal 1: ./scripts/run.sh --debug          (GDB stub on :1234)
+     Add PROFILE=debug for line-level symbols (slower guest).
+  2. Terminal 2: gdb -x scripts/debug-kernel.py
 """
 
 import gdb
 import os
 
-# Find the kernel binary
+# Find the kernel binary (debug profile preferred, release as fallback)
 script_dir = os.path.dirname(os.path.abspath(__file__))
 project_root = os.path.dirname(script_dir)
-binary = os.path.join(
-    project_root,
-    "target/x86_64-unknown-uefi/debug/raisernics.efi"
-)
+candidates = [
+    os.path.join(project_root, "target/x86_64-unknown-uefi/debug/rsdos.efi"),
+    os.path.join(project_root, "target/x86_64-unknown-uefi/release/rsdos.efi"),
+]
+binary = next((c for c in candidates if os.path.exists(c)), candidates[0])
 
 # Connect to QEMU's GDB stub
 gdb.execute("target remote :1234")
diff --git a/scripts/lib-boot-args.sh b/scripts/lib-boot-args.sh
deleted file mode 100644
index ec97500..0000000
--- a/scripts/lib-boot-args.sh
+++ /dev/null
@@ -1,38 +0,0 @@
-#!/usr/bin/env bash
-#
-# scripts/lib-boot-args.sh — shared CLI parsing for the QEMU boot scripts.
-# Sourced, not executed.  The caller sets default values for GUI/DEBUG/
-# MEM/SMP first, then calls `parse_boot_args "$@"`.  A caller with extra
-# flags defines its own `handle_arg()` to intercept them before the
-# shared cases run (unknown args still fail loudly).
-set -euo pipefail
-
-parse_boot_args() {
-	while [ $# -gt 0 ]; do
-		case "$1" in
-		--gui | -g) GUI="-vga std" ;;
-		--debug | -d) DEBUG="-s -S" ;;
-		--mem)
-			shift
-			MEM="$1"
-			;;
-		--smp)
-			shift
-			SMP="$1"
-			;;
-		--help | -h)
-			head -20 "$0" | grep "^#" | sed 's/^# //'
-			exit 0
-			;;
-		*) handle_arg "$1" ;;
-		esac
-		shift
-	done
-}
-
-# Default: no extra flags.  A script with more defines its own before
-# calling parse_boot_args.
-handle_arg() {
-	echo "unknown: $1"
-	exit 1
-}
diff --git a/scripts/lib.sh b/scripts/lib.sh
new file mode 100644
index 0000000..d5aecac
--- /dev/null
+++ b/scripts/lib.sh
@@ -0,0 +1,168 @@
+#!/usr/bin/env bash
+#
+# scripts/lib.sh — shared config and helpers for the rs-dos scripts.
+#
+# Sourced, never executed.  Everything here is the single definition of
+# "how we build and how we boot": the build script, the image assembler,
+# the QEMU runner and the tests all read their settings from this file.
+#
+# Config is environment-overridable (TARGET, PROFILE, SYSTEM_IMG, OVMF,
+# QEMU, MEM, SMP) so callers and CI can tune it without editing scripts.
+set -euo pipefail
+
+SCRIPT_DIR="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)"
+PROJECT_DIR="$(cd "$SCRIPT_DIR/.." && pwd)"
+TESTS_DIR="$SCRIPT_DIR/tests"
+
+# ---- config ---------------------------------------------------------------
+TARGET="${TARGET:-x86_64-unknown-uefi}"
+PROFILE="${PROFILE:-release}"
+OUT_DIR="${OUT_DIR:-$PROJECT_DIR/target/$TARGET/$PROFILE}"
+KERNEL="$OUT_DIR/rsdos.efi"
+SYSTEM_IMG="${SYSTEM_IMG:-/tmp/system.img}"
+OVMF="${OVMF:-/usr/share/edk2/x64/OVMF.4m.fd}"
+QEMU="${QEMU:-qemu-system-x86_64}"
+MEM="${MEM:-256M}"
+SMP="${SMP:-1}"
+
+# Binaries whose launch surface is a window rather than a terminal
+# (ADR 0006): staged into /bin/gui, everything else into /bin/cli.
+GUI_BINS="paint"
+
+cd "$PROJECT_DIR"
+
+# ---- build ----------------------------------------------------------------
+#
+# The one and only cargo invocation in the repo.  Builds the kernel and
+# every external binary in a single pass so the image can stage both.
+
+cargo_flags() {
+	[ "$PROFILE" = "release" ] && printf '%s' "--release"
+}
+
+build_all() {
+	echo "=== build (kernel + bins, $PROFILE) ==="
+	# shellcheck disable=SC2046 # cargo_flags is a flag word, intentionally split
+	cargo build --workspace --target "$TARGET" $(cargo_flags)
+}
+
+# ---- system image ---------------------------------------------------------
+
+# stage_image [mksystem args...] — assemble /tmp/system.img if it is stale.
+# Freshness is decided inside mksystem.sh; an up-to-date image is never
+# touched, so files written at runtime survive.
+stage_image() {
+	"$SCRIPT_DIR/mksystem.sh" "$@"
+}
+
+# ---- QEMU -----------------------------------------------------------------
+
+# qemu_args — the common machine every boot shares: OVMF, the system
+# image as the single SATA drive, 256M q35.  Callers append display,
+# monitor and serial choices.
+qemu_args() {
+	printf '%s\n' \
+		-bios "$OVMF" \
+		-drive "file=$SYSTEM_IMG,format=raw,if=none,id=disk" \
+		-device ide-hd,drive=disk,bus=ide.0 \
+		-m "$MEM" \
+		-machine q35 \
+		-cpu qemu64 \
+		-no-reboot \
+		-smp "$SMP"
+}
+
+# ---- test harness ---------------------------------------------------------
+#
+# Every test-*.sh does:
+#   TNAME=disk; source lib.sh; test_boot            # waits for the shell
+#   sendkeys "ls /disk" "poweroff"
+#   wait_qemu_exit
+# Runtime files are namespaced per test so parallel runs cannot collide.
+
+TNAME="${TNAME:-rsdos}"
+QPID="/tmp/rsdos-$TNAME-qpid"
+SOCK="/tmp/rsdos-$TNAME-qmon.sock"
+LOG="/tmp/rsdos-$TNAME-serial.log"
+QLOG="/tmp/rsdos-$TNAME-qemu.log"
+
+fail() {
+	echo "FAIL: $1"
+	[ -f "$LOG" ] && tail -40 "$LOG"
+	exit 1
+}
+
+# wait_log FILE PATTERN TIMEOUT-SECONDS — poll a file for a regex.
+wait_log() {
+	local i=0
+	while [ "$i" -lt $((${3:-60} * 10)) ]; do
+		grep -q "$2" "$1" 2>/dev/null && return 0
+		sleep 0.1
+		i=$((i + 1))
+	done
+	return 1
+}
+
+# wait_qemu_exit TIMEOUT-SECONDS — poll until the pid is gone.
+wait_qemu_exit() {
+	local i=0
+	while [ "$i" -lt $((${1:-30} * 10)) ]; do
+		kill -0 "$(cat "$QPID" 2>/dev/null)" 2>/dev/null || return 0
+		sleep 0.1
+		i=$((i + 1))
+	done
+	return 1
+}
+
+# qemu_hmp CMD — run one HMP command on the monitor socket.
+qemu_hmp() {
+	python3 - "$SOCK" "$1" <<'EOF'
+import socket, sys, time
+s = socket.socket(socket.AF_UNIX, socket.SOCK_STREAM)
+s.connect(sys.argv[1])
+s.sendall((sys.argv[2] + "\n").encode())
+time.sleep(0.4)
+EOF
+}
+
+# sendkeys "line" ... — type shell commands into the guest via sendkeys.py.
+sendkeys() {
+	python3 "$TESTS_DIR/sendkeys.py" --sock "$SOCK" "$@"
+}
+
+# test_cleanup — reap a leftover QEMU from a previous run of this test
+# and clear this test's runtime files.  Called before test_boot.
+test_cleanup() {
+	kill "$(cat "$QPID" 2>/dev/null)" 2>/dev/null || true
+	rm -f "$SOCK" "$LOG"
+}
+
+# test_on_exit — EXIT trap: never leave a QEMU behind, but keep the logs
+# (they are the post-mortem for a failed test).
+test_on_exit() {
+	kill "$(cat "$QPID" 2>/dev/null)" 2>/dev/null || true
+}
+
+# test_boot [extra-qemu-args...] — boot the system image headless with the
+# serial log at $LOG and a monitor socket at $SOCK, then wait for the
+# shell.  Extra args attach more drives (e.g. a CRASHLOG stick).
+test_boot() {
+	test_cleanup
+	trap test_on_exit EXIT
+	# A stale/poisoned OVMF varstore makes the firmware skip the
+	# \EFI\BOOT fallback entirely — every test boots from a fresh copy.
+	# Namespaced per test so parallel runs cannot race on it.
+	local nv="/tmp/rsdos-ovmf-vars-$TNAME.fd"
+	rm -f "$nv"
+	cp "$OVMF" "$nv"
+	local -a qargs
+	mapfile -t qargs < <(qemu_args)
+	"$QEMU" -bios "$nv" \
+		"${qargs[@]}" \
+		-serial "file:$LOG" \
+		-monitor "unix:$SOCK,server,nowait" \
+		-display none \
+		"$@" >"$QLOG" 2>&1 &
+	echo $! >"$QPID"
+	wait_log "$LOG" "boot: entering shell" 90 || fail "kernel never reached the shell"
+}
diff --git a/scripts/mksystem.sh b/scripts/mksystem.sh
index 044c86c..053fb3b 100755
--- a/scripts/mksystem.sh
+++ b/scripts/mksystem.sh
@@ -2,44 +2,49 @@
 #
 # scripts/mksystem.sh — assemble the single dd-able rs-dos system image
 #
-# Replaces the old two-source setup (vvfat `esp/` directory for boot +
-# separate /tmp/disk.img for data).  One FAT32 image holds EVERYTHING:
+# One FAT32 image holds EVERYTHING (boot medium and data medium are the
+# same disk, mounted by the kernel at /disk/<UID>/):
 #
-#   \bzImage                 kernel (rsbl requires this exact path)
-#   \initramfs.cpio.gz       empty initramfs (rsbl requires it)
-#   \EFI\BOOT\BOOTX64.EFI    boot entry: the kernel (default) or rsboot
+#   \EFI\BOOT\BOOTX64.EFI    the kernel — the firmware boots it directly
+#   \bzImage                 kernel copy (rsbl's expected path, real hw)
+#   \initramfs.cpio.gz       empty initramfs (rsbl requires the path)
+#   \bin\cli\*.efi           terminal binaries  (invoked by the shell)
+#   \bin\gui\*.efi           windowed binaries  (launched with no shell)
 #   \etc\motd.txt            seed config
-#   \bin\cli\  \bin\gui\     binary tree (empty until Phase 2/4 migrate tools)
 #   \*.txt                   seed files (seed/)
 #
-# The firmware boots from this image and the kernel mounts the same
-# volume at /disk/<UID>/ — boot medium and data medium are one disk.
+# Freshness: an existing image is only rebuilt when a kernel/binary/seed
+# file is newer than it, so files written at runtime survive across
+# boots.  --force always re-creates (wipes runtime data).
 #
 # Usage:
-#   ./scripts/mksystem.sh [options] [output.img]     # default /tmp/system.img
+#   ./scripts/mksystem.sh [options] [output.img]   default: $SYSTEM_IMG
 #
 # Options:
-#   --force        rebuild even if the image exists (Makefile stamps handle
-#                  normal freshness; without --force an existing image is kept,
-#                  so user files survive across reboots)
+#   --force        rebuild even if the image is up to date
 #   --size NM      image size in MB (default 64)
-#   --chain        \EFI\BOOT\BOOTX64.EFI = rsboot bootloader (full chain:
-#                  firmware → rsboot → rsnix).  Default is the kernel itself
-#                  (direct: firmware → rsnix), matching the old dev loop.
-#   --gpt          wrap the FAT volume in a GPT partition table (for dd-ing
-#                  to real USB sticks whose firmware refuses superfloppies)
 #   --label NAME   FAT volume label (default RSDOS)
+#   --gpt          wrap the FAT volume in a GPT partition table (for
+#                  dd-ing to real USB sticks whose firmware refuses
+#                  superfloppies)
+#   --help         show this help
+#
+# Needs: dosfstools (mkfs.fat), mtools (mcopy/mmd), cargo (kernel+bins
+# built via scripts/build.sh when missing).
 #
 set -euo pipefail
 
 SCRIPT_DIR="$(cd "$(dirname "$0")" && pwd)"
-PROJECT_DIR="$(dirname "$SCRIPT_DIR")"
-cd "$PROJECT_DIR"
+# Absolute self path: lib.sh cd's to the project root, so a relative $0
+# would no longer resolve by the time --help prints the header.
+SELF="$SCRIPT_DIR/$(basename "$0")"
+
+# shellcheck source=lib.sh
+source "$SCRIPT_DIR/lib.sh"
 
-IMG="/tmp/system.img"
+IMG="$SYSTEM_IMG"
 SIZE_MB=64
 FORCE=0
-CHAIN=0
 GPT=0
 LABEL="RSDOS"
 
@@ -52,18 +57,15 @@ while [ $# -gt 0 ]; do
 		shift
 		SIZE_MB="$1"
 		;;
-	--chain)
-		CHAIN=1
-		;;
-	--gpt)
-		GPT=1
-		;;
 	--label)
 		shift
 		LABEL="$1"
 		;;
+	--gpt)
+		GPT=1
+		;;
 	--help | -h)
-		head -30 "$0" | grep "^#" | sed 's/^# \?//'
+		awk 'NR > 1 && /^#/ { sub(/^# ?/, ""); print; next } NR > 1 { exit }' "$SELF"
 		exit 0
 		;;
 	-*)
@@ -77,15 +79,9 @@ while [ $# -gt 0 ]; do
 	shift
 done
 
-TARGET=x86_64-unknown-uefi
-PROFILE=release
-OUT_DIR="target/$TARGET/$PROFILE"
-KERNEL="$OUT_DIR/rsdos.efi"
-BZIMAGE="esp/bzImage"
-INITRD="esp/initramfs.cpio.gz"
-BOOTLOADER="build/bootloader/BOOTX64.EFI"
+SEED_DIR="$PROJECT_DIR/seed"
 
-# ---- checks ----
+# ---- checks ---------------------------------------------------------------
 for cmd in mkfs.fat mcopy mmd; do
 	if ! command -v "$cmd" >/dev/null 2>&1; then
 		echo "mksystem: $cmd not found (install dosfstools + mtools)" >&2
@@ -101,29 +97,26 @@ if [ "$GPT" -eq 1 ]; then
 	done
 fi
 
-if [ -f "$IMG" ] && [ "$FORCE" -eq 0 ]; then
-	echo "mksystem: $IMG already exists (use --force to re-create)"
-	exit 0
+# ---- build (only when artifacts are missing; build.sh is the only cargo
+# invocation, so an already-compiled tree costs nothing) --------------------
+if [ ! -f "$KERNEL" ] || ! ls "$OUT_DIR"/*.efi >/dev/null 2>&1; then
+	"$SCRIPT_DIR/build.sh"
 fi
 
-# ---- build kernel ----
-if [ ! -f "$KERNEL" ]; then
-	echo "mksystem: building kernel..."
-	cargo build --release --package rsdos --target "$TARGET"
-fi
-
-# ---- build bootloader (chain mode only) ----
-if [ "$CHAIN" -eq 1 ] && [ ! -f "$BOOTLOADER" ]; then
-	echo "mksystem: building bootloader..."
-	"$SCRIPT_DIR/build-bootloader.sh"
+# ---- freshness stamp ------------------------------------------------------
+newest=""
+for f in "$OUT_DIR"/*.efi "$SEED_DIR"/*; do
+	[ -f "$f" ] || continue
+	if [ -z "$newest" ] || [ "$f" -nt "$newest" ]; then
+		newest="$f"
+	fi
+done
+if [ "$FORCE" -eq 0 ] && [ -f "$IMG" ] && { [ -z "$newest" ] || [ ! "$newest" -nt "$IMG" ]; }; then
+	echo "mksystem: up to date: $IMG (use --force to re-create)"
+	exit 0
 fi
 
-# ---- deploy kernel artifacts to esp/ (shared with the old layout) ----
-mkdir -p esp/EFI/BOOT
-cp "$KERNEL" "$BZIMAGE"
-[ -f "$INITRD" ] || printf '' | gzip >"$INITRD"
-
-# ---- create the FAT volume ----
+# ---- create the FAT volume ------------------------------------------------
 rm -f "$IMG"
 SIZE_BLOCKS=$((SIZE_MB * 1024)) # mkfs.fat counts 1024-byte blocks
 echo "mksystem: creating $IMG (${SIZE_MB}M FAT32, label $LABEL)"
@@ -131,34 +124,47 @@ mkfs.fat -C -F 32 -n "$LABEL" "$IMG" "$SIZE_BLOCKS" >/dev/null
 
 echo "mksystem: staging system tree"
 mmd -i "$IMG" ::/EFI ::/EFI/BOOT ::/etc ::/bin ::/bin/cli ::/bin/gui
-mcopy -i "$IMG" "$BZIMAGE" ::/bzImage
+
+# The firmware entry point and rsbl's kernel path are the same file.
+mcopy -i "$IMG" "$KERNEL" ::/EFI/BOOT/BOOTX64.EFI
+mcopy -i "$IMG" "$KERNEL" ::/bzImage
+INITRD="$(mktemp -t rsdos-initrd.XXXXXX)"
+trap 'rm -f "$INITRD"' EXIT
+printf '' | gzip >"$INITRD"
 mcopy -i "$IMG" "$INITRD" ::/initramfs.cpio.gz
-if [ "$CHAIN" -eq 1 ]; then
-	mcopy -i "$IMG" "$BOOTLOADER" ::/EFI/BOOT/BOOTX64.EFI
-	echo "  \\EFI\\BOOT\\BOOTX64.EFI  <- rsboot (full chain)"
-else
-	mcopy -i "$IMG" "$KERNEL" ::/EFI/BOOT/BOOTX64.EFI
-	echo "  \\EFI\\BOOT\\BOOTX64.EFI  <- kernel (direct)"
-fi
-echo "  \\bzImage  \\initramfs.cpio.gz  \\bin{\\cli,\\gui}  \\etc"
+echo "  \\EFI\\BOOT\\BOOTX64.EFI  \\bzImage  \\initramfs.cpio.gz"
+
+# External binaries: everything under bins/ was compiled into $OUT_DIR.
+# Launch surface decides the directory (ADR 0006): GUI_BINS -> /bin/gui,
+# everything else -> /bin/cli.
+for src in "$OUT_DIR"/*.efi; do
+	[ -f "$src" ] || continue
+	name="$(basename "$src" .efi)"
+	[ "$name" = "rsdos" ] && continue # the kernel is not a /bin binary
+	case " $GUI_BINS " in
+	*" $name "*) kind="gui" ;;
+	*) kind="cli" ;;
+	esac
+	mcopy -i "$IMG" "$src" "::/bin/$kind/$name.efi"
+	printf '  \\bin\\%s\\%s.efi\n' "$kind" "$name"
+done
 
 # Seed files: motd lives in \etc, everything else at the volume root.
-SEED_DIR="$PROJECT_DIR/seed"
 if [ -d "$SEED_DIR" ]; then
 	for f in "$SEED_DIR"/*; do
 		[ -f "$f" ] || continue
 		name="$(basename "$f")"
 		if [ "$name" = "motd.txt" ]; then
 			mcopy -i "$IMG" "$f" ::/etc/"$name"
-			echo "  \\etc\\$name"
+			printf '  \\etc\\%s\n' "$name"
 		else
 			mcopy -i "$IMG" "$f" ::/"$name"
-			echo "  \\$name"
+			printf '  \\%s\n' "$name"
 		fi
 	done
 fi
 
-# ---- optional GPT wrapper (real-hardware dd target) ----
+# ---- optional GPT wrapper (real-hardware dd target) -----------------------
 if [ "$GPT" -eq 1 ]; then
 	GPT_START=2048 # 1 MiB offset (standard alignment)
 	GPT_IMG="$(mktemp)"
@@ -179,6 +185,6 @@ fi
 echo ""
 echo "=== Done: $IMG ==="
 ls -lh "$IMG"
-echo "Boot with:  make run   (or: make boot-image)"
+echo "Boot with:  ./scripts/run.sh   (or: make run)"
 [ "$GPT" -eq 0 ] && echo "USB dd tip: add --gpt for firmwares that refuse superfloppies"
 exit 0
diff --git a/scripts/qemu.sh b/scripts/qemu.sh
deleted file mode 100755
index eeaf4de..0000000
--- a/scripts/qemu.sh
+++ /dev/null
@@ -1,99 +0,0 @@
-#!/usr/bin/env bash
-# =============================================================================
-# scripts/qemu.sh — flexible QEMU launcher for rs-dos
-#
-# Usage:
-#   ./scripts/qemu.sh                     # serial console (no graphics)
-#   ./scripts/qemu.sh --gui               # graphical window
-#   ./scripts/qemu.sh --debug             # GDB stub on :1234
-#   ./scripts/qemu.sh --chain             # full boot chain (firmware → rsboot → rsnix)
-#   ./scripts/qemu.sh --bios /path/to.fd  # custom OVMF
-#   ./scripts/qemu.sh --mem 512M          # memory size
-#   ./scripts/qemu.sh --smp 2             # SMP cores
-#
-# One image, one drive — the system image contains kernel + ESP + data.
-# =============================================================================
-set -euo pipefail
-
-SCRIPT_DIR="$(cd "$(dirname "$0")" && pwd)"
-PROJECT_DIR="$(cd "$SCRIPT_DIR/.." && pwd)"
-cd "$PROJECT_DIR"
-
-# Defaults
-GUI_FLAG=""
-DEBUG_FLAG=""
-CHAIN_FLAG=""
-OVMF="${OVMF:-/usr/share/edk2/x64/OVMF.4m.fd}"
-MEM="${MEM:-256M}"
-SMP="${SMP:-1}"
-SYSTEM_IMG="${SYSTEM_IMG:-/tmp/system.img}"
-
-# Pre-build
-make all
-
-# Parse args
-while [ $# -gt 0 ]; do
-	case "$1" in
-	--gui | -g)
-		GUI_FLAG="-vga std"
-		shift
-		;;
-	--debug | -d)
-		DEBUG_FLAG="-s -S"
-		shift
-		;;
-	--chain | -c)
-		CHAIN_FLAG=1
-		SYSTEM_IMG="${SYSTEM_IMG:-rs-dos.img}"
-		shift
-		;;
-	--image | -i)
-		SYSTEM_IMG="$2"
-		shift 2
-		;;
-	--bios | -b)
-		OVMF="$2"
-		shift 2
-		;;
-	--mem)
-		MEM="$2"
-		shift 2
-		;;
-	--smp)
-		SMP="$2"
-		shift 2
-		;;
-	*)
-		echo "unknown: $1"
-		exit 1
-		;;
-	esac
-done
-
-# Stage system image if needed
-if [ -n "$CHAIN_FLAG" ]; then
-	./scripts/mksystem.sh --chain --gpt "$SYSTEM_IMG"
-else
-	./scripts/mksystem.sh "$SYSTEM_IMG"
-fi
-
-echo ""
-echo "=== Booting ==="
-echo "  image:  $SYSTEM_IMG"
-echo "  ovmf:   $OVMF"
-echo "  mem:    $MEM   smp: $SMP"
-echo "  gui:    $([ -n "$GUI_FLAG" ] && echo yes || echo no)"
-echo "  gdb:    $([ -n "$DEBUG_FLAG" ] && echo ':1234' || echo off)"
-echo ""
-
-exec qemu-system-x86_64 \
-	-bios "$OVMF" \
-	-drive "file=$SYSTEM_IMG,format=raw,if=none,id=hd" \
-	-device ide-hd,drive=hd \
-	-serial stdio \
-	-m "$MEM" \
-	-machine q35 \
-	-cpu qemu64 \
-	-no-reboot \
-	-smp "$SMP" \
-	$GUI_FLAG $DEBUG_FLAG
diff --git a/scripts/run.sh b/scripts/run.sh
new file mode 100755
index 0000000..4b6f481
--- /dev/null
+++ b/scripts/run.sh
@@ -0,0 +1,142 @@
+#!/usr/bin/env bash
+#
+# scripts/run.sh — build, stage and boot the system image in QEMU.
+#
+# Usage:
+#   ./scripts/run.sh                 build + stage + boot (window + serial)
+#   ./scripts/run.sh --headless      serial console only, no window
+#   ./scripts/run.sh --debug         GDB stub on :1234, CPU starts paused
+#                                    (attach: gdb -x scripts/debug-kernel.py)
+#   ./scripts/run.sh --monitor       HMP monitor socket for sendkeys.py /
+#                                    test-focus.py (default path below)
+#   ./scripts/run.sh --fresh         re-create the system image first
+#                                    (wipes runtime data on the image)
+#   ./scripts/run.sh --mem 512M      guest memory (default 256M)
+#   ./scripts/run.sh --smp 2         guest CPUs (default 1)
+#   ./scripts/run.sh --bios FILE     OVMF firmware (default: system path)
+#   ./scripts/run.sh --image FILE    system image (default: /tmp/system.img)
+#   ./scripts/run.sh --grab          confine the pointer: GTK runs as an X11
+#                                    (XWayland) client and grabs on hover
+#   ./scripts/run.sh --no-grab       Wayland-native window, no pointer grab
+#
+# Mouse:  Wayland forbids global pointer grabs, so a Wayland-native window
+#         cannot confine the cursor (QEMU's grab silently does nothing).
+#         In a Wayland session with XWayland, run.sh defaults to --grab;
+#         Ctrl+Alt+G toggles the grab in either mode.
+#
+# Environment (same names the other scripts honour): TARGET, PROFILE,
+# SYSTEM_IMG, OVMF, QEMU, MEM, SMP.
+#
+# Two-command flow:      ./scripts/build.sh && ./scripts/run.sh
+# One-command flow:      ./scripts/run.sh        (builds what is missing)
+#
+# Monitor socket:        /tmp/rsdos-monitor.sock
+#
+set -euo pipefail
+
+SCRIPT_DIR="$(cd "$(dirname "$0")" && pwd)"
+
+usage() {
+	awk 'NR > 1 && /^#/ { sub(/^# ?/, ""); print; next } NR > 1 { exit }' "$0"
+}
+
+HEADLESS=0
+DEBUG=0
+FRESH=0
+MON=0
+MON_SOCK="/tmp/rsdos-monitor.sock"
+GRAB="" # "" = auto: grab when a Wayland session has XWayland
+
+while [ $# -gt 0 ]; do
+	case "$1" in
+	--headless | -H) HEADLESS=1 ;;
+	# GDB stub + keep whatever profile the env asked for (release is the
+	# default; PROFILE=debug ./scripts/run.sh --debug adds line symbols).
+	--debug | -d) DEBUG=1 ;;
+	--fresh) FRESH=1 ;;
+	--monitor) MON=1 ;;
+	--mem) shift; MEM="$1" ;;
+	--smp) shift; SMP="$1" ;;
+	--bios) shift; OVMF="$1" ;;
+	--image | -i) shift; SYSTEM_IMG="$1" ;;
+	--grab) GRAB=1 ;;
+	--no-grab) GRAB=0 ;;
+	--help | -h)
+		usage
+		exit 0
+		;;
+	*)
+		echo "run.sh: unknown argument: $1" >&2
+		usage >&2
+		exit 1
+		;;
+	esac
+	shift
+done
+
+# shellcheck source=lib.sh
+source "$SCRIPT_DIR/lib.sh" # reads MEM/SMP/OVMF/SYSTEM_IMG from the env
+
+# build.sh is a separate process: it re-derives OUT_DIR/KERNEL from these,
+# so whatever we resolved above (including a --mem/--bios override) wins
+# there too.
+export TARGET PROFILE QEMU MEM SMP OVMF SYSTEM_IMG
+
+# ---- mouse grab (Wayland) --------------------------------------------------
+# Wayland forbids global pointer grabs, so a Wayland-native GTK window cannot
+# confine the cursor — QEMU's grab silently does nothing there.  XWayland can,
+# so a Wayland session that has XWayland (DISPLAY set) defaults to GTK-on-X11
+# plus grab-on-hover.  Ctrl+Alt+G toggles the grab; --no-grab keeps the
+# Wayland-native window.
+if [ -z "$GRAB" ]; then
+	if [ "${XDG_SESSION_TYPE:-}" = "wayland" ] && [ -n "${DISPLAY:-}" ]; then
+		GRAB=1
+	else
+		GRAB=0
+	fi
+fi
+[ "$HEADLESS" -eq 1 ] && GRAB=0 # no window, nothing to grab
+if [ "$GRAB" -eq 1 ]; then
+	if [ -n "${DISPLAY:-}" ]; then
+		export GDK_BACKEND=x11
+	else
+		echo "run.sh: --grab needs XWayland (DISPLAY is unset); not grabbing" >&2
+		GRAB=0
+	fi
+fi
+
+# ---- build + stage --------------------------------------------------------
+"$SCRIPT_DIR/build.sh"
+if [ "$FRESH" -eq 1 ]; then
+	stage_image --force
+else
+	stage_image
+fi
+
+# ---- boot -----------------------------------------------------------------
+mapfile -t QARGS < <(qemu_args)
+if [ "$HEADLESS" -eq 1 ]; then
+	QARGS+=(-display none)
+else
+	QARGS+=(-vga std)
+	if [ "$GRAB" -eq 1 ]; then
+		QARGS+=(-display gtk,grab-on-hover=on)
+	fi
+fi
+[ "$MON" -eq 1 ] && QARGS+=(-monitor "unix:$MON_SOCK,server,nowait")
+[ "$DEBUG" -eq 1 ] && QARGS+=(-s -S)
+QARGS+=(-serial stdio)
+
+echo ""
+echo "=== boot ==="
+echo "  image:  $SYSTEM_IMG"
+echo "  ovmf:   $OVMF"
+echo "  mem:    $MEM   smp: $SMP"
+echo "  mode:   $([ "$HEADLESS" -eq 1 ] && echo headless || echo window)   gdb: $([ "$DEBUG" -eq 1 ] && echo ':1234 (paused)' || echo off)"
+if [ "$HEADLESS" -eq 0 ]; then
+	echo "  mouse:  $([ "$GRAB" -eq 1 ] && echo 'grab on hover (XWayland; Ctrl+Alt+G toggles)' || echo 'not grabbed (Wayland cannot confine the pointer)')"
+fi
+[ "$MON" -eq 1 ] && echo "  monitor: unix:$MON_SOCK"
+echo ""
+
+exec "$QEMU" "${QARGS[@]}"
diff --git a/scripts/sendkeys.py b/scripts/sendkeys.py
deleted file mode 100755
index a67903d..0000000
--- a/scripts/sendkeys.py
+++ /dev/null
@@ -1,103 +0,0 @@
-#!/usr/bin/env python3
-"""Type lines into a QEMU guest via the monitor's `sendkey` command.
-
-Each positional argument is one line: it is typed character by character
-(US layout) followed by Enter.  Use it to drive the rs-dos shell from a
-test script without a display.
-
-Usage:
-    sendkeys.py "ls /disk" "echo hi WRITING /disk/a.txt" "poweroff"
-    sendkeys.py --sock /tmp/qmon.sock "date"
-
-Environment: QMON_SOCK (default: /tmp/qmon.sock)
-"""
-import os
-import socket
-import sys
-import time
-
-SOCK = os.environ.get("QMON_SOCK", "/tmp/qmon.sock")
-
-# Unshifted punctuation needs QEMU's *named* keys — bare '-'/'.'/'/' are
-# not valid sendkey names (and '-' is the modifier separator).
-BASE = {
-    "-": "minus", "=": "equal", "[": "bracketleft", "]": "bracketright",
-    "\\": "backslash", ";": "semicolon", "'": "apostrophe",
-    ",": "comma", ".": "dot", "/": "slash", "`": "grave",
-}
-
-# Characters that need a shift key on US layout, and the key QEMU's
-# `sendkey` understands for them.
-SHIFT = {
-    "~": "grave", "!": "1", "@": "2", "#": "3", "$": "4", "%": "5",
-    "^": "6", "&": "7", "*": "8", "(": "9", ")": "0",
-    "_": "minus", "+": "equal", "{": "bracketleft", "}": "bracketright",
-    "|": "backslash", ":": "semicolon", '"': "apostrophe",
-    "<": "comma", ">": "dot", "?": "slash",
-}
-
-ALNUM = set("abcdefghijklmnopqrstuvwxyz0123456789")
-
-
-def connect(path, timeout=60):
-    """Connect to the monitor socket, retrying until QEMU is up."""
-    deadline = time.time() + timeout
-    while True:
-        try:
-            s = socket.socket(socket.AF_UNIX, socket.SOCK_STREAM)
-            s.connect(path)
-            return s
-        except OSError:
-            if time.time() > deadline:
-                raise
-            time.sleep(0.2)
-
-
-def sendkey(sock, keys):
-    sock.sendall(("sendkey %s\n" % keys).encode())
-
-
-def type_line(sock, line):
-    for ch in line:
-        if ch == " ":
-            sendkey(sock, "spc")
-        elif ch in BASE:
-            sendkey(sock, BASE[ch])
-        elif ch in SHIFT:
-            sendkey(sock, "shift-" + SHIFT[ch])
-        elif ch.isupper():
-            sendkey(sock, "shift-" + ch.lower())
-        elif ch in ALNUM:
-            sendkey(sock, ch)
-        else:
-            sys.stderr.write("warning: no sendkey mapping for %r\n" % ch)
-            continue
-        time.sleep(0.25)
-    sendkey(sock, "ret")
-    time.sleep(1.5)
-
-
-def main():
-    args = [a for a in sys.argv[1:] if a != "--sock"]
-    sock_path = SOCK
-    if "--sock" in sys.argv:
-        i = sys.argv.index("--sock")
-        sock_path = sys.argv[i + 1]
-        args = sys.argv[i + 2:]
-    if not args:
-        sys.stderr.write(__doc__ or "")
-        return 1
-    sock = connect(sock_path)
-    # Let the monitor drain any startup banner before typing.
-    time.sleep(0.5)
-    for line in args:
-        try:
-            type_line(sock, line)
-        except OSError:
-            # Guest powered off (last line was usually "poweroff").
-            break
-    return 0
-
-
-if __name__ == "__main__":
-    sys.exit(main())
diff --git a/scripts/test-disk.sh b/scripts/test-disk.sh
deleted file mode 100755
index 881b475..0000000
--- a/scripts/test-disk.sh
+++ /dev/null
@@ -1,131 +0,0 @@
-#!/usr/bin/env bash
-#
-# scripts/test-disk.sh — full automated data-disk round trip.
-#
-# Builds the kernel, ensures the FAT32 image exists (with --fresh it is
-# re-formatted and re-seeded), boots QEMU headless, drives the shell via
-# the monitor, then verifies the results with mtools and fsck.
-#
-# Usage:
-#   ./scripts/test-disk.sh            # reuse existing image
-#   ./scripts/test-disk.sh --fresh    # re-format the image first
-#
-# Environment:
-#   DISK_IMG  data disk path (default: /tmp/disk.img)
-#   OVMF      firmware (default: /usr/share/edk2/x64/OVMF.4m.fd)
-#   QEMU      qemu binary (default: qemu-system-x86_64)
-#
-set -euo pipefail
-
-SCRIPT_DIR="$(cd "$(dirname "$0")" && pwd)"
-PROJECT_DIR="$(dirname "$SCRIPT_DIR")"
-cd "$PROJECT_DIR"
-
-FRESH=0
-[ "${1:-}" = "--fresh" ] && FRESH=1
-
-OVMF="${OVMF:-/usr/share/edk2/x64/OVMF.4m.fd}"
-QEMU="${QEMU:-qemu-system-x86_64}"
-IMG="${SYSTEM_IMG:-/tmp/system.img}"
-QPID=/tmp/rsdos-test-qpid
-SOCK=/tmp/rsdos-test-qmon.sock
-LOG=/tmp/rsdos-test-serial.log
-QLOG=/tmp/rsdos-test-qemu.log
-STAMP="$(date +%s)"
-
-# Never leave a QEMU behind (an orphan holding our stdout would hang any
-# caller that pipes our output).
-trap 'kill "$(cat "$QPID" 2>/dev/null)" 2>/dev/null || true' EXIT
-
-fail() {
-	echo "FAIL: $1"
-	[ -f "$LOG" ] && tail -20 "$LOG"
-	exit 1
-}
-
-# wait_log FILE PATTERN TIMEOUT-SECONDS — poll a file for a regex.
-wait_log() {
-	local i=0
-	while [ "$i" -lt $((${3:-60} * 10)) ]; do
-		grep -q "$2" "$1" 2>/dev/null && return 0
-		sleep 0.1
-		i=$((i + 1))
-	done
-	return 1
-}
-
-# wait_qemu_exit TIMEOUT-SECONDS — poll until the pid is gone.
-wait_qemu_exit() {
-	local i=0
-	while [ "$i" -lt $((${1:-30} * 10)) ]; do
-		kill -0 "$(cat "$QPID" 2>/dev/null)" 2>/dev/null || return 0
-		sleep 0.1
-		i=$((i + 1))
-	done
-	return 1
-}
-
-echo "==> 1/6 build kernel (debug)"
-cargo build --release --package rsdos --target x86_64-unknown-uefi
-
-echo "==> 2/6 ensure system image"
-if [ "$FRESH" -eq 1 ]; then
-	"$SCRIPT_DIR/mksystem.sh" --force "$IMG"
-else
-	"$SCRIPT_DIR/mksystem.sh" "$IMG"
-fi
-
-echo "==> 3/6 boot QEMU (headless)"
-kill "$(cat "$QPID" 2>/dev/null)" 2>/dev/null || true
-sleep 1
-rm -f "$SOCK" "$LOG"
-# Throwaway OVMF varstore: a stale/poisoned NvVars (e.g. left by the old
-# vvfat setup) makes the firmware skip the \EFI\BOOT fallback entirely.
-NV="/tmp/rsdos-test-ovmf-vars.fd"
-rm -f "$NV"
-cp /usr/share/edk2/x64/OVMF.4m.fd "$NV"
-"$QEMU" -bios "$NV" \
-	-drive file="$IMG",format=raw,if=none,id=disk \
-	-device ide-hd,drive=disk,bus=ide.0 \
-	-serial file:"$LOG" \
-	-monitor unix:"$SOCK",server,nowait \
-	-m 256M -machine q35 -cpu qemu64 -no-reboot -display none \
-	>"$QLOG" 2>&1 &
-
-wait_log "$LOG" "boot: entering shell" 90 || fail "kernel never reached the shell"
-sleep 1
-
-# Volumes mount under /disk/<UID>/ where UID = "LABEL-SERIAL" (e.g.
-# RSDOS-5BD1E55F).  Discover it from the boot log so the test works on
-# any image without knowing the serial in advance.
-VOL_UID="$(grep -a 'fat: mounted' "$LOG" | sed -n 's/.*at \/disk\/\([^ )]*\).*/\1/p' | head -1)"
-[ -n "$VOL_UID" ] || fail "no FAT32 volume was mounted (look for 'fat: mounted' in the log)"
-echo "  mounted volume UID: $VOL_UID"
-
-echo "==> 4/6 drive the shell (ls / mkdir / echo WRITING / cat / poweroff)"
-# The filename is deliberately >13 chars so the FAT LFN path gets
-# multi-entry entries (they're stored last-first on disk).
-TESTFILE="disk-test-$STAMP.txt"
-python3 "$SCRIPT_DIR/sendkeys.py" --sock "$SOCK" \
-	"ls /disk" \
-	"mkdir /disk/$VOL_UID/sub" \
-	"echo disk-test-$STAMP WRITING /disk/$VOL_UID/sub/$TESTFILE" \
-	"cat /disk/$VOL_UID/sub/$TESTFILE" \
-	"poweroff"
-
-echo "==> 5/6 wait for shutdown"
-wait_qemu_exit 30 || fail "QEMU did not exit after poweroff"
-
-echo "==> 6/6 verify"
-grep -a "disk-test-$STAMP" "$LOG" >/dev/null || fail "cat output missing from serial log"
-if ! fsck.fat -n "$IMG" >/tmp/rsdos-fsck.out 2>&1; then
-	fail "fsck.fat reports problems: $(cat /tmp/rsdos-fsck.out | tail -3)"
-fi
-MT="$(mtype -i "$IMG" "::/sub/$TESTFILE" 2>/dev/null || true)"
-[ "$MT" = "disk-test-$STAMP" ] || fail "mtype mismatch: got '$MT'"
-
-echo ""
-echo "PASS — disk round trip OK (fsck clean, file survived poweroff)"
-echo "  image:      $IMG"
-echo "  volume:     /disk/$VOL_UID"
-echo "  written:    /disk/$VOL_UID/sub/$TESTFILE = \"disk-test-$STAMP\""
diff --git a/scripts/test-fault.sh b/scripts/test-fault.sh
deleted file mode 100755
index be2d7cd..0000000
--- a/scripts/test-fault.sh
+++ /dev/null
@@ -1,85 +0,0 @@
-#!/usr/bin/env bash
-#
-# scripts/test-fault.sh — fault-diagnostics verification.
-#
-# Proves the fault-dump path: every CPU exception prints a white-on-red
-# band to the framebuffer and a parseable serial line before halting.
-#
-# Usage: ./scripts/test-fault.sh
-# Env:   OVMF, QEMU, SYSTEM_IMG
-#
-set -euo pipefail
-
-SCRIPT_DIR="$(cd "$(dirname "$0")" && pwd)"
-PROJECT_DIR="$(cd "$SCRIPT_DIR/.." && pwd)"
-cd "$PROJECT_DIR"
-
-OVMF="${OVMF:-/usr/share/edk2/x64/OVMF.4m.fd}"
-QEMU="${QEMU:-qemu-system-x86_64}"
-SYSTEM_IMG="${SYSTEM_IMG:-/tmp/system.img}"
-QPID=/tmp/rsdos-fault-qpid
-SOCK=/tmp/rsdos-fault-qmon.sock
-LOG=/tmp/rsdos-fault-serial.log
-QLOG=/tmp/rsdos-fault-qemu.log
-
-trap 'kill "$(cat "$QPID" 2>/dev/null)" 2>/dev/null || true' EXIT
-
-fail() {
-	echo "FAIL: $1"
-	[ -f "$LOG" ] && tail -40 "$LOG"
-	exit 1
-}
-
-wait_log() {
-	local i=0
-	while [ "$i" -lt $((${3:-60} * 10)) ]; do
-		grep -q "$2" "$1" 2>/dev/null && return 0
-		sleep 0.1
-		i=$((i + 1))
-	done
-	return 1
-}
-
-echo "==> 1/5 build kernel (debug)"
-cargo build --release --package rsdos --target x86_64-unknown-uefi
-
-echo "==> 2/5 stage system image"
-"$SCRIPT_DIR/mksystem.sh" --force "$SYSTEM_IMG"
-
-echo "==> 3/5 boot QEMU (headless, + dedicated CRASHLOG stick)"
-kill "$(cat "$QPID" 2>/dev/null)" 2>/dev/null || true
-sleep 1
-rm -f "$SOCK" "$LOG"
-CRASH_IMG=/tmp/rsdos-crash.img
-mkfs.fat -C -F 32 -n CRASHLOG "$CRASH_IMG" >/dev/null
-"$QEMU" -bios "$OVMF" \
-	-drive file="$SYSTEM_IMG",format=raw,if=none,id=disk \
-	-device ide-hd,drive=disk,bus=ide.0 \
-	-drive file="$CRASH_IMG",format=raw,if=none,id=crash \
-	-device ide-hd,drive=crash,bus=ide.1 \
-	-serial file:"$LOG" \
-	-monitor unix:"$SOCK",server,nowait \
-	-m 256M -machine q35 -cpu qemu64 -no-reboot -display none \
-	>"$QLOG" 2>&1 &
-echo $! >"$QPID"
-
-wait_log "$LOG" "boot: entering shell" 90 || fail "kernel never reached the shell"
-
-echo "==> 4/5 boot diagnostics present"
-grep -aq "gop: fb base=" "$LOG" || fail "fb geometry diagnostic missing"
-grep -aq "gop: mode .* selected" "$LOG" || fail "mode-selection diagnostic missing"
-grep -aq "CRASHLOG" "$LOG" || fail "CRASHLOG stick not mounted"
-
-echo "==> 5/5 inject a page fault (fault command)"
-python3 "$SCRIPT_DIR/sendkeys.py" --sock "$SOCK" \
-	"clear" \
-	"fault"
-sleep 2
-
-grep -aq "!!! page fault vec=14 .*rip=" "$LOG" || fail "page-fault dump line missing"
-grep -aq "cr2=0x400000000000" "$LOG" || fail "CR2 not reported (faulting address)"
-grep -aq "task=0 \"shell\"" "$LOG" || fail "faulting task not identified"
-grep -aq "!!! halting" "$LOG" || fail "no halt message"
-
-echo ""
-echo "PASS — fault dump verified"
diff --git a/scripts/test-focus.py b/scripts/test-focus.py
deleted file mode 100755
index e1bbe2d..0000000
--- a/scripts/test-focus.py
+++ /dev/null
@@ -1,56 +0,0 @@
-#!/usr/bin/env python3
-"""Drive the focus-routing gate: 3 windows, type markers, verify routing.
-
-Connects to the QEMU monitor once and keeps the socket open (the per-call
-scripts/sendkeys.py pattern loses the socket when the monitor resets).
-
-Usage:  python3 scripts/test-focus.py /tmp/qmon.sock
-"""
-import socket
-import sys
-import time
-
-sock = socket.socket(socket.AF_UNIX, socket.SOCK_STREAM)
-sock.connect(sys.argv[1] if len(sys.argv) > 1 else "/tmp/sysboot-mon.sock")
-
-
-def sk(k, d=0.35):
-    sock.sendall(f"sendkey {k}\n".encode())
-    time.sleep(d)
-
-
-def line(txt, d=0.8):
-    for ch in txt:
-        if ch == " ":
-            sk("spc", 0.1)
-        elif ch.isupper():
-            sk("shift-" + ch.lower(), 0.12)
-        else:
-            sk(ch, 0.12)
-    sk("ret", d)
-
-
-time.sleep(0.5)
-
-# Home is focused at boot.
-line("windows")          # expect: home + nothing (or existing windows)
-time.sleep(1.5)
-
-# F1 -> term1 (focused on creation)
-sk("f1", 1.5)
-line("echo TERM1MARK")
-time.sleep(1.0)
-
-# F1 -> term2 (focused on creation)
-sk("f1", 1.5)
-line("echo TERM2MARK")
-time.sleep(1.0)
-
-# F2 cycles z-order: term2 -> term1
-sk("f2", 0.8)
-line("echo CYCLED")
-time.sleep(1.0)
-
-# F2 again: term1 -> home (window 0, oldest)
-sk("f2", 0.8)
-line("windows")
diff --git a/scripts/test-gfx.sh b/scripts/test-gfx.sh
deleted file mode 100755
index 1c7f9ac..0000000
--- a/scripts/test-gfx.sh
+++ /dev/null
@@ -1,84 +0,0 @@
-#!/usr/bin/env bash
-#
-# scripts/test-gfx.sh — automated graphics round-trip test.
-#
-# Builds kernel, boots headless, runs the in-kernel gfx self-test and
-# the draw/paint demo.
-#
-# Env: OVMF, QEMU, SYSTEM_IMG
-#
-set -euo pipefail
-
-SCRIPT_DIR="$(cd "$(dirname "$0")" && pwd)"
-PROJECT_DIR="$(cd "$SCRIPT_DIR/.." && pwd)"
-cd "$PROJECT_DIR"
-
-OVMF="${OVMF:-/usr/share/edk2/x64/OVMF.4m.fd}"
-QEMU="${QEMU:-qemu-system-x86_64}"
-SYSTEM_IMG="${SYSTEM_IMG:-/tmp/system.img}"
-QPID=/tmp/rsdos-gfx-qpid
-SOCK=/tmp/rsdos-gfx-qmon.sock
-LOG=/tmp/rsdos-gfx-serial.log
-QLOG=/tmp/rsdos-gfx-qemu.log
-
-trap 'kill "$(cat "$QPID" 2>/dev/null)" 2>/dev/null || true' EXIT
-
-fail() {
-	echo "FAIL: $1"
-	[ -f "$LOG" ] && tail -40 "$LOG"
-	exit 1
-}
-
-wait_log() {
-	local i=0
-	while [ "$i" -lt $((${3:-60} * 10)) ]; do
-		grep -q "$2" "$1" 2>/dev/null && return 0
-		sleep 0.1
-		i=$((i + 1))
-	done
-	return 1
-}
-
-echo "==> 1/5 build kernel (debug)"
-cargo build --release --package rsdos --target x86_64-unknown-uefi
-
-echo "==> 2/5 stage system image"
-"$SCRIPT_DIR/mksystem.sh" --force "$SYSTEM_IMG"
-
-echo "==> 3/5 boot QEMU (headless)"
-kill "$(cat "$QPID" 2>/dev/null)" 2>/dev/null || true
-sleep 1
-rm -f "$SOCK" "$LOG"
-"$QEMU" -bios "$OVMF" \
-	-drive file="$SYSTEM_IMG",format=raw,if=none,id=disk \
-	-device ide-hd,drive=disk,bus=ide.0 \
-	-serial file:"$LOG" \
-	-monitor unix:"$SOCK",server,nowait \
-	-m 256M -machine q35 -cpu qemu64 -no-reboot -display none \
-	>"$QLOG" 2>&1 &
-echo $! >"$QPID"
-
-wait_log "$LOG" "boot: entering shell" 90 || fail "kernel never reached the shell"
-wait_log "$LOG" "cursor: task " 10 || fail "cursor task did not spawn"
-
-echo "==> 4/5 in-kernel pixel self-test (gfx check)"
-python3 "$SCRIPT_DIR/sendkeys.py" --sock "$SOCK" "gfx check"
-wait_log "$LOG" "gfx: check" 30 || fail "gfx check did not run"
-
-echo "==> 5/5 gfx demo (draw scene)"
-python3 "$SCRIPT_DIR/sendkeys.py" --sock "$SOCK" "gfx" "poweroff"
-wait_qemu_exit() {
-	local i=0
-	while [ "$i" -lt $((${1:-30} * 10)) ]; do
-		kill -0 "$(cat "$QPID" 2>/dev/null)" 2>/dev/null || return 0
-		sleep 0.1
-		i=$((i + 1))
-	done
-	return 1
-}
-wait_qemu_exit 30 || fail "QEMU did not exit after poweroff"
-
-grep -aq "gfx: drew status bar" "$LOG" || fail "gfx demo did not draw"
-
-echo ""
-echo "PASS — gfx round trip"
diff --git a/scripts/test-mouse.sh b/scripts/test-mouse.sh
deleted file mode 100755
index 9f9f018..0000000
--- a/scripts/test-mouse.sh
+++ /dev/null
@@ -1,125 +0,0 @@
-#!/usr/bin/env bash
-#
-# scripts/test-mouse.sh — automated PS/2 mouse round-trip test.
-#
-# Boots QEMU headless, injects mouse movement via QEMU monitor,
-# verifies the on-screen cursor tracks it, and tests the mouse
-# stream routing command.
-#
-# Env: OVMF, QEMU, SYSTEM_IMG
-#
-set -euo pipefail
-
-SCRIPT_DIR="$(cd "$(dirname "$0")" && pwd)"
-PROJECT_DIR="$(cd "$SCRIPT_DIR/.." && pwd)"
-cd "$PROJECT_DIR"
-
-OVMF="${OVMF:-/usr/share/edk2/x64/OVMF.4m.fd}"
-QEMU="${QEMU:-qemu-system-x86_64}"
-SYSTEM_IMG="${SYSTEM_IMG:-/tmp/system.img}"
-QPID=/tmp/rsdos-mouse-qpid
-SOCK=/tmp/rsdos-mouse-qmon.sock
-LOG=/tmp/rsdos-mouse-serial.log
-QLOG=/tmp/rsdos-mouse-qemu.log
-
-trap 'kill "$(cat "$QPID" 2>/dev/null)" 2>/dev/null || true' EXIT
-
-fail() {
-	echo "FAIL: $1"
-	[ -f "$LOG" ] && tail -40 "$LOG"
-	exit 1
-}
-
-wait_log() {
-	local i=0
-	while [ "$i" -lt $((${3:-60} * 10)) ]; do
-		grep -q "$2" "$1" 2>/dev/null && return 0
-		sleep 0.1
-		i=$((i + 1))
-	done
-	return 1
-}
-
-qemu_hmp() {
-	python3 - "$SOCK" "$1" <<'EOF'
-import socket, sys, time
-s = socket.socket(socket.AF_UNIX, socket.SOCK_STREAM)
-s.connect(sys.argv[1])
-s.sendall((sys.argv[2] + "\n").encode())
-time.sleep(0.4)
-EOF
-}
-
-cursor_state() {
-	python3 "$SCRIPT_DIR/sendkeys.py" --sock "$SOCK" "cursor"
-	sleep 0.5
-	sed -n 's/.*cursor: x=\([0-9]*\) y=\([0-9]*\) buttons=\([A-Za-z-]*\).*/\1 \2 \3/p' "$LOG" | tail -1
-}
-
-echo "==> 1/6 build kernel (debug)"
-cargo build --release --package rsdos --target x86_64-unknown-uefi
-
-echo "==> 2/6 stage system image"
-"$SCRIPT_DIR/mksystem.sh" --force "$SYSTEM_IMG"
-
-echo "==> 3/6 boot QEMU (headless)"
-kill "$(cat "$QPID" 2>/dev/null)" 2>/dev/null || true
-sleep 1
-rm -f "$SOCK" "$LOG"
-"$QEMU" -bios "$OVMF" \
-	-drive file="$SYSTEM_IMG",format=raw,if=none,id=disk \
-	-device ide-hd,drive=disk,bus=ide.0 \
-	-serial file:"$LOG" \
-	-monitor unix:"$SOCK",server,nowait \
-	-m 256M -machine q35 -cpu qemu64 -no-reboot -display none \
-	>"$QLOG" 2>&1 &
-echo $! >"$QPID"
-
-wait_log "$LOG" "boot: entering shell" 90 || fail "kernel never reached the shell"
-grep -aq "ps2: mouse ready" "$LOG" || fail "mouse driver did not come up at boot"
-wait_log "$LOG" "cursor: task " 10 || fail "cursor task did not spawn"
-
-echo "==> 4/6 cursor position tracks injected movement"
-INIT=$(cursor_state)
-[ -n "$INIT" ] || fail "no initial cursor position"
-IX=$(echo "$INIT" | awk '{print $1}')
-IY=$(echo "$INIT" | awk '{print $2}')
-IB=$(echo "$INIT" | awk '{print $3}')
-echo "    initial: x=$IX y=$IY buttons=$IB"
-[ "$IB" = "---" ] || fail "expected no buttons at boot, got $IB"
-
-qemu_hmp "mouse_move 20 7"
-S1=$(cursor_state)
-X1=$(echo "$S1" | awk '{print $1}')
-Y1=$(echo "$S1" | awk '{print $2}')
-[ "$X1" -eq $((IX + 20)) ] || fail "x did not move +20 (was $IX, now $X1)"
-[ "$Y1" -eq $((IY + 7)) ] || fail "y did not move +7 (was $IY, now $Y1)"
-echo "    moved:   x=$X1 y=$Y1 (delta +20,+7)"
-
-echo "==> 5/6 left button edge detection"
-qemu_hmp "mouse_button 1"
-S2=$(cursor_state)
-IB2=$(echo "$S2" | awk '{print $3}')
-[ "$IB2" = "L--" ] || [ "$IB2" = "L--" ] || fail "expected L--, got $IB2"
-
-qemu_hmp "mouse_button 0"
-S3=$(cursor_state)
-IB3=$(echo "$S3" | awk '{print $3}')
-[ "$IB3" = "---" ] || fail "expected --- after release, got $IB3"
-echo "    button:  $IB2 → $IB3"
-
-echo "==> 6/6 mouse stream routing to task 3"
-python3 "$SCRIPT_DIR/sendkeys.py" --sock "$SOCK" "msgrecv"
-sleep 1
-python3 "$SCRIPT_DIR/sendkeys.py" --sock "$SOCK" "mouse 3"
-qemu_hmp "mouse_move 20 7"
-qemu_hmp "mouse_button 1"
-sleep 0.5
-qemu_hmp "mouse_button 0"
-sleep 0.5
-python3 "$SCRIPT_DIR/sendkeys.py" --sock "$SOCK" "ctrl-c"
-sleep 0.5
-grep -aq "Mouse(+20,+7" "$LOG" || fail "routed mouse move not logged"
-
-echo ""
-echo "PASS — mouse round trip"
diff --git a/scripts/test-msg.sh b/scripts/test-msg.sh
deleted file mode 100755
index ff7fd72..0000000
--- a/scripts/test-msg.sh
+++ /dev/null
@@ -1,140 +0,0 @@
-#!/usr/bin/env bash
-#
-# scripts/test-msg.sh — automated scheduler message-queue round trip.
-#
-# Tests all message types (user, timer, key, mouse), real-input routing,
-# and queue-full boundary.
-#
-# Env: OVMF, QEMU, SYSTEM_IMG
-#
-set -euo pipefail
-
-SCRIPT_DIR="$(cd "$(dirname "$0")" && pwd)"
-PROJECT_DIR="$(cd "$SCRIPT_DIR/.." && pwd)"
-cd "$PROJECT_DIR"
-
-OVMF="${OVMF:-/usr/share/edk2/x64/OVMF.4m.fd}"
-QEMU="${QEMU:-qemu-system-x86_64}"
-SYSTEM_IMG="${SYSTEM_IMG:-/tmp/system.img}"
-QPID=/tmp/rsdos-msg-qpid
-SOCK=/tmp/rsdos-msg-qmon.sock
-LOG=/tmp/rsdos-msg-serial.log
-QLOG=/tmp/rsdos-msg-qemu.log
-
-trap 'kill "$(cat "$QPID" 2>/dev/null)" 2>/dev/null || true' EXIT
-
-fail() {
-	echo "FAIL: $1"
-	[ -f "$LOG" ] && tail -40 "$LOG"
-	exit 1
-}
-
-wait_log() {
-	local i=0
-	while [ "$i" -lt $((${3:-60} * 10)) ]; do
-		grep -q "$2" "$1" 2>/dev/null && return 0
-		sleep 0.1
-		i=$((i + 1))
-	done
-	return 1
-}
-
-qemu_hmp() {
-	python3 - "$SOCK" "$1" <<'EOF'
-import socket, sys, time
-s = socket.socket(socket.AF_UNIX, socket.SOCK_STREAM)
-s.connect(sys.argv[1])
-s.sendall((sys.argv[2] + "\n").encode())
-time.sleep(0.4)
-EOF
-}
-
-wait_qemu_exit() {
-	local i=0
-	while [ "$i" -lt $((${1:-30} * 10)) ]; do
-		kill -0 "$(cat "$QPID" 2>/dev/null)" 2>/dev/null || return 0
-		sleep 0.1
-		i=$((i + 1))
-	done
-	return 1
-}
-
-echo "==> 1/5 build kernel (debug)"
-cargo build --release --package rsdos --target x86_64-unknown-uefi
-
-echo "==> 2/5 stage system image"
-"$SCRIPT_DIR/mksystem.sh" --force "$SYSTEM_IMG"
-
-echo "==> 3/5 boot QEMU (headless)"
-kill "$(cat "$QPID" 2>/dev/null)" 2>/dev/null || true
-sleep 1
-rm -f "$SOCK" "$LOG"
-"$QEMU" -bios "$OVMF" \
-	-drive file="$SYSTEM_IMG",format=raw,if=none,id=disk \
-	-device ide-hd,drive=disk,bus=ide.0 \
-	-serial file:"$LOG" \
-	-monitor unix:"$SOCK",server,nowait \
-	-m 256M -machine q35 -cpu qemu64 -no-reboot -display none \
-	>"$QLOG" 2>&1 &
-echo $! >"$QPID"
-
-wait_log "$LOG" "boot: entering shell" 90 || fail "kernel never reached the shell"
-
-echo "==> 4/5 drive the shell (msgrecv / send / mouse routing / queue-full)"
-python3 "$SCRIPT_DIR/sendkeys.py" --sock "$SOCK" \
-	"msgrecv" \
-	"send 3 user 42" \
-	"send 3 timer" \
-	"send 3 key enter" \
-	"send 3 key ctrl-c" \
-	"send 3 key f3" \
-	"send 3 mouse 5 -3 3" \
-	"sleep 800" \
-	"jobs"
-
-python3 "$SCRIPT_DIR/sendkeys.py" --sock "$SOCK" "mouse 3"
-qemu_hmp "mouse_move 20 7"
-qemu_hmp "mouse_button 1"
-qemu_hmp "mouse_move -5 -3"
-qemu_hmp "mouse_button 0"
-qemu_hmp "sendkey ctrl-c"
-
-python3 "$SCRIPT_DIR/sendkeys.py" --sock "$SOCK" \
-	"send 0 user 1" \
-	"send 0 user 2" \
-	"send 0 user 3" \
-	"send 0 user 4" \
-	"send 0 user 5" \
-	"send 0 user 6" \
-	"send 0 user 7" \
-	"send 0 user 8" \
-	"send 0 user 9" \
-	"send 0 user 10" \
-	"send 0 user 11" \
-	"send 0 user 12" \
-	"send 0 user 13" \
-	"send 0 user 14" \
-	"send 0 user 15" \
-	"send 0 user 16" \
-	"send 0 user 17" \
-	"sleep 800" \
-	"jobs" \
-	"poweroff"
-
-echo "==> 5/5 wait for shutdown + verify"
-wait_qemu_exit 30 || fail "QEMU did not exit after poweroff"
-
-grep -aq "msgrecv: task 3 listening" "$LOG" || fail "msgrecv did not spawn"
-grep -aq "msgrecv\[3\]: User(42)" "$LOG" || fail "user message missing"
-grep -aq "msgrecv\[3\]: Timer" "$LOG" || fail "timer message missing"
-grep -aq "msgrecv\[3\]: Key(Enter)" "$LOG" || fail "key enter missing"
-grep -aq "msgrecv\[3\]: Key(Ctrl-c)" "$LOG" || fail "key ctrl-c missing"
-grep -aq "msgrecv\[3\]: Key(F3)" "$LOG" || fail "key f3 missing"
-grep -aq "msgrecv\[3\]: Mouse(+5,-3 L R)" "$LOG" || fail "synthesized mouse message missing"
-grep -aq "msgrecv\[3\]: Mouse(+20,+7" "$LOG" || fail "real mouse move 20,7 not routed to queue"
-grep -aq "msgrecv\[3\]: Mouse(-5,-3 L" "$LOG" || fail "held-button routed move missing"
-grep -aq "queue full" "$LOG" || fail "17th send did not report queue full"
-grep -aq "send: unknown type" "$LOG" && fail "a bad send slipped through (expected none)"
-
-echo ""
-echo "PASS — message queues OK"
diff --git a/scripts/tests/sendkeys.py b/scripts/tests/sendkeys.py
new file mode 100755
index 0000000..9300242
--- /dev/null
+++ b/scripts/tests/sendkeys.py
@@ -0,0 +1,105 @@
+#!/usr/bin/env python3
+"""Type lines into a QEMU guest via the monitor's `sendkey` command.
+
+Each positional argument is one line: it is typed character by character
+(US layout) followed by Enter.  Use it to drive the rs-dos shell from a
+test script without a display.
+
+Used by scripts/tests/test-*.sh, and manually against an interactive
+session started with `./scripts/run.sh --monitor`:
+
+    ./scripts/tests/sendkeys.py "ls /disk" "date" "poweroff"
+    ./scripts/tests/sendkeys.py --sock /tmp/rsdos-monitor.sock "date"
+
+Environment: QMON_SOCK (default: /tmp/rsdos-monitor.sock)
+"""
+import os
+import socket
+import sys
+import time
+
+SOCK = os.environ.get("QMON_SOCK", "/tmp/rsdos-monitor.sock")
+
+# Unshifted punctuation needs QEMU's *named* keys — bare '-'/'.'/'/' are
+# not valid sendkey names (and '-' is the modifier separator).
+BASE = {
+    "-": "minus", "=": "equal", "[": "bracketleft", "]": "bracketright",
+    "\\": "backslash", ";": "semicolon", "'": "apostrophe",
+    ",": "comma", ".": "dot", "/": "slash", "`": "grave",
+}
+
+# Characters that need a shift key on US layout, and the key QEMU's
+# `sendkey` understands for them.
+SHIFT = {
+    "~": "grave", "!": "1", "@": "2", "#": "3", "$": "4", "%": "5",
+    "^": "6", "&": "7", "*": "8", "(": "9", ")": "0",
+    "_": "minus", "+": "equal", "{": "bracketleft", "}": "bracketright",
+    "|": "backslash", ":": "semicolon", '"': "apostrophe",
+    "<": "comma", ">": "dot", "?": "slash",
+}
+
+ALNUM = set("abcdefghijklmnopqrstuvwxyz0123456789")
+
+
+def connect(path, timeout=60):
+    """Connect to the monitor socket, retrying until QEMU is up."""
+    deadline = time.time() + timeout
+    while True:
+        try:
+            s = socket.socket(socket.AF_UNIX, socket.SOCK_STREAM)
+            s.connect(path)
+            return s
+        except OSError:
+            if time.time() > deadline:
+                raise
+            time.sleep(0.2)
+
+
+def sendkey(sock, keys):
+    sock.sendall(("sendkey %s\n" % keys).encode())
+
+
+def type_line(sock, line):
+    for ch in line:
+        if ch == " ":
+            sendkey(sock, "spc")
+        elif ch in BASE:
+            sendkey(sock, BASE[ch])
+        elif ch in SHIFT:
+            sendkey(sock, "shift-" + SHIFT[ch])
+        elif ch.isupper():
+            sendkey(sock, "shift-" + ch.lower())
+        elif ch in ALNUM:
+            sendkey(sock, ch)
+        else:
+            sys.stderr.write("warning: no sendkey mapping for %r\n" % ch)
+            continue
+        time.sleep(0.25)
+    sendkey(sock, "ret")
+    time.sleep(1.5)
+
+
+def main():
+    args = [a for a in sys.argv[1:] if a != "--sock"]
+    sock_path = SOCK
+    if "--sock" in sys.argv:
+        i = sys.argv.index("--sock")
+        sock_path = sys.argv[i + 1]
+        args = sys.argv[i + 2:]
+    if not args:
+        sys.stderr.write(__doc__ or "")
+        return 1
+    sock = connect(sock_path)
+    # Let the monitor drain any startup banner before typing.
+    time.sleep(0.5)
+    for line in args:
+        try:
+            type_line(sock, line)
+        except OSError:
+            # Guest powered off (last line was usually "poweroff").
+            break
+    return 0
+
+
+if __name__ == "__main__":
+    sys.exit(main())
diff --git a/scripts/tests/test-disk.sh b/scripts/tests/test-disk.sh
new file mode 100755
index 0000000..3836b6d
--- /dev/null
+++ b/scripts/tests/test-disk.sh
@@ -0,0 +1,67 @@
+#!/usr/bin/env bash
+#
+# scripts/tests/test-disk.sh — full automated data-disk round trip.
+#
+# Builds, stages the system image, boots QEMU headless, drives the shell
+# via the monitor (ls / mkdir / echo WRITING / cat / poweroff), then
+# verifies the results with mtools and fsck.
+#
+# Usage:
+#   ./scripts/tests/test-disk.sh            reuse the existing image
+#   ./scripts/tests/test-disk.sh --fresh    reformat + reseed first
+#
+# Env: SYSTEM_IMG, OVMF, QEMU (see scripts/lib.sh)
+#
+set -euo pipefail
+TNAME="disk"
+# shellcheck source=../lib.sh
+source "$(dirname "$0")/../lib.sh"
+
+FRESH=0
+[ "${1:-}" = "--fresh" ] && FRESH=1
+STAMP="$(date +%s)"
+
+echo "==> 1/6 build (kernel + bins)"
+build_all
+
+echo "==> 2/6 stage system image"
+if [ "$FRESH" -eq 1 ]; then stage_image --force; else stage_image; fi
+
+echo "==> 3/6 boot QEMU (headless)"
+test_boot
+sleep 1
+
+# Volumes mount under /disk/<UID>/ where UID = "LABEL-SERIAL" (e.g.
+# RSDOS-5BD1E55F).  Discover it from the boot log so the test works on
+# any image without knowing the serial in advance.
+VOL_UID="$(grep -a 'fat: mounted' "$LOG" | sed -n 's/.*at \/disk\/\([^ )]*\).*/\1/p' | head -1)"
+[ -n "$VOL_UID" ] || fail "no FAT32 volume was mounted (look for 'fat: mounted' in the log)"
+echo "  mounted volume UID: $VOL_UID"
+
+echo "==> 4/6 drive the shell (ls / mkdir / echo WRITING / cat / poweroff)"
+# The filename is deliberately >13 chars so the FAT LFN path gets
+# multi-entry entries (they're stored last-first on disk).
+TESTFILE="disk-test-$STAMP.txt"
+sendkeys \
+	"ls /disk" \
+	"mkdir /disk/$VOL_UID/sub" \
+	"echo disk-test-$STAMP WRITING /disk/$VOL_UID/sub/$TESTFILE" \
+	"cat /disk/$VOL_UID/sub/$TESTFILE" \
+	"poweroff"
+
+echo "==> 5/6 wait for shutdown"
+wait_qemu_exit 30 || fail "QEMU did not exit after poweroff"
+
+echo "==> 6/6 verify"
+grep -a "disk-test-$STAMP" "$LOG" >/dev/null || fail "cat output missing from serial log"
+if ! fsck.fat -n "$SYSTEM_IMG" >/tmp/rsdos-fsck.out 2>&1; then
+	fail "fsck.fat reports problems: $(tail -3 /tmp/rsdos-fsck.out)"
+fi
+MT="$(mtype -i "$SYSTEM_IMG" "::/sub/$TESTFILE" 2>/dev/null || true)"
+[ "$MT" = "disk-test-$STAMP" ] || fail "mtype mismatch: got '$MT'"
+
+echo ""
+echo "PASS — disk round trip OK (fsck clean, file survived poweroff)"
+echo "  image:      $SYSTEM_IMG"
+echo "  volume:     /disk/$VOL_UID"
+echo "  written:    /disk/$VOL_UID/sub/$TESTFILE = \"disk-test-$STAMP\""
diff --git a/scripts/tests/test-fault.sh b/scripts/tests/test-fault.sh
new file mode 100755
index 0000000..0c39cde
--- /dev/null
+++ b/scripts/tests/test-fault.sh
@@ -0,0 +1,47 @@
+#!/usr/bin/env bash
+#
+# scripts/tests/test-fault.sh — fault-diagnostics verification.
+#
+# Proves the fault-dump path: every CPU exception prints a white-on-red
+# band to the framebuffer and a parseable serial line before halting.
+# Boots with a dedicated CRASHLOG FAT stick on ide.1 so the crash band
+# has somewhere to write.
+#
+# Usage: ./scripts/tests/test-fault.sh
+# Env:   SYSTEM_IMG, OVMF, QEMU (see scripts/lib.sh)
+#
+set -euo pipefail
+TNAME="fault"
+# shellcheck source=../lib.sh
+source "$(dirname "$0")/../lib.sh"
+
+echo "==> 1/5 build (kernel + bins)"
+build_all
+
+echo "==> 2/5 stage system image"
+stage_image --force
+
+echo "==> 3/5 boot QEMU (headless, + dedicated CRASHLOG stick)"
+CRASH_IMG=/tmp/rsdos-crash.img
+rm -f "$CRASH_IMG"
+mkfs.fat -C -F 32 -n CRASHLOG "$CRASH_IMG" 65536 >/dev/null
+test_boot \
+	-drive "file=$CRASH_IMG,format=raw,if=none,id=crash" \
+	-device ide-hd,drive=crash,bus=ide.1
+
+echo "==> 4/5 boot diagnostics present"
+grep -aq "gop: fb base=" "$LOG" || fail "fb geometry diagnostic missing"
+grep -aq "gop: mode .* selected" "$LOG" || fail "mode-selection diagnostic missing"
+grep -aq "CRASHLOG" "$LOG" || fail "CRASHLOG stick not mounted"
+
+echo "==> 5/5 inject a page fault (fault command)"
+sendkeys "clear" "fault"
+sleep 2
+
+grep -aq "!!! page fault vec=14 .*rip=" "$LOG" || fail "page-fault dump line missing"
+grep -aq "cr2=0x400000000000" "$LOG" || fail "CR2 not reported (faulting address)"
+grep -aq "task=0 \"shell\"" "$LOG" || fail "faulting task not identified"
+grep -aq "!!! halting" "$LOG" || fail "no halt message"
+
+echo ""
+echo "PASS — fault dump verified"
diff --git a/scripts/tests/test-focus.py b/scripts/tests/test-focus.py
new file mode 100755
index 0000000..cfa317a
--- /dev/null
+++ b/scripts/tests/test-focus.py
@@ -0,0 +1,57 @@
+#!/usr/bin/env python3
+"""Drive the focus-routing gate: 3 windows, type markers, verify routing.
+
+Connects to the QEMU monitor once and keeps the socket open (the per-call
+sendkeys.py pattern loses the socket when the monitor resets).
+
+Usage:  start the guest with `./scripts/run.sh --monitor`, then
+        python3 scripts/tests/test-focus.py [/tmp/rsdos-monitor.sock]
+"""
+import socket
+import sys
+import time
+
+sock = socket.socket(socket.AF_UNIX, socket.SOCK_STREAM)
+sock.connect(sys.argv[1] if len(sys.argv) > 1 else "/tmp/rsdos-monitor.sock")
+
+
+def sk(k, d=0.35):
+    sock.sendall(f"sendkey {k}\n".encode())
+    time.sleep(d)
+
+
+def line(txt, d=0.8):
+    for ch in txt:
+        if ch == " ":
+            sk("spc", 0.1)
+        elif ch.isupper():
+            sk("shift-" + ch.lower(), 0.12)
+        else:
+            sk(ch, 0.12)
+    sk("ret", d)
+
+
+time.sleep(0.5)
+
+# Home is focused at boot.
+line("windows")          # expect: home + nothing (or existing windows)
+time.sleep(1.5)
+
+# F1 -> term1 (focused on creation)
+sk("f1", 1.5)
+line("echo TERM1MARK")
+time.sleep(1.0)
+
+# F1 -> term2 (focused on creation)
+sk("f1", 1.5)
+line("echo TERM2MARK")
+time.sleep(1.0)
+
+# F2 cycles z-order: term2 -> term1
+sk("f2", 0.8)
+line("echo CYCLED")
+time.sleep(1.0)
+
+# F2 again: term1 -> home (window 0, oldest)
+sk("f2", 0.8)
+line("windows")
diff --git a/scripts/tests/test-gfx.sh b/scripts/tests/test-gfx.sh
new file mode 100755
index 0000000..613318f
--- /dev/null
+++ b/scripts/tests/test-gfx.sh
@@ -0,0 +1,37 @@
+#!/usr/bin/env bash
+#
+# scripts/tests/test-gfx.sh — automated graphics round-trip test.
+#
+# Builds, boots headless, runs the in-kernel gfx self-test and the
+# status-bar demo, then powers off.
+#
+# Usage: ./scripts/tests/test-gfx.sh
+# Env:   SYSTEM_IMG, OVMF, QEMU (see scripts/lib.sh)
+#
+set -euo pipefail
+TNAME="gfx"
+# shellcheck source=../lib.sh
+source "$(dirname "$0")/../lib.sh"
+
+echo "==> 1/5 build (kernel + bins)"
+build_all
+
+echo "==> 2/5 stage system image"
+stage_image --force
+
+echo "==> 3/5 boot QEMU (headless)"
+test_boot
+wait_log "$LOG" "cursor: task " 10 || fail "cursor task did not spawn"
+
+echo "==> 4/5 in-kernel pixel self-test (gfx check)"
+sendkeys "gfx check"
+wait_log "$LOG" "gfx check: PASS" 30 || fail "gfx check did not run"
+
+echo "==> 5/5 gfx demo (draw scene)"
+sendkeys "gfx" "poweroff"
+wait_qemu_exit 30 || fail "QEMU did not exit after poweroff"
+
+grep -aq "gfx: drew status bar" "$LOG" || fail "gfx demo did not draw"
+
+echo ""
+echo "PASS — gfx round trip"
diff --git a/scripts/tests/test-mouse.sh b/scripts/tests/test-mouse.sh
new file mode 100755
index 0000000..bb835be
--- /dev/null
+++ b/scripts/tests/test-mouse.sh
@@ -0,0 +1,83 @@
+#!/usr/bin/env bash
+#
+# scripts/tests/test-mouse.sh — automated PS/2 mouse round-trip test.
+#
+# Boots QEMU headless, injects mouse movement via the QEMU monitor,
+# verifies the on-screen cursor tracks it, and tests the mouse stream
+# routing command.
+#
+# Usage: ./scripts/tests/test-mouse.sh
+# Env:   SYSTEM_IMG, OVMF, QEMU (see scripts/lib.sh)
+#
+set -euo pipefail
+TNAME="mouse"
+# shellcheck source=../lib.sh
+source "$(dirname "$0")/../lib.sh"
+
+# cursor_state — one-shot `cursor` command, parsed to "x y buttons".
+cursor_state() {
+	sendkeys "cursor"
+	sleep 0.5
+	sed -n 's/.*cursor: x=\([0-9]*\) y=\([0-9]*\) buttons=\([A-Za-z-]*\).*/\1 \2 \3/p' "$LOG" | tail -1
+}
+
+echo "==> 1/6 build (kernel + bins)"
+build_all
+
+echo "==> 2/6 stage system image"
+stage_image --force
+
+echo "==> 3/6 boot QEMU (headless)"
+test_boot
+grep -aq "ps2: mouse ready" "$LOG" || fail "mouse driver did not come up at boot"
+wait_log "$LOG" "cursor: task " 10 || fail "cursor task did not spawn"
+
+echo "==> 4/6 cursor position tracks injected movement"
+INIT=$(cursor_state)
+[ -n "$INIT" ] || fail "no initial cursor position"
+IX=$(echo "$INIT" | awk '{print $1}')
+IY=$(echo "$INIT" | awk '{print $2}')
+IB=$(echo "$INIT" | awk '{print $3}')
+echo "    initial: x=$IX y=$IY buttons=$IB"
+[ "$IB" = "---" ] || fail "expected no buttons at boot, got $IB"
+
+qemu_hmp "mouse_move 20 7"
+S1=$(cursor_state)
+X1=$(echo "$S1" | awk '{print $1}')
+Y1=$(echo "$S1" | awk '{print $2}')
+[ "$X1" -eq $((IX + 20)) ] || fail "x did not move +20 (was $IX, now $X1)"
+[ "$Y1" -eq $((IY + 7)) ] || fail "y did not move +7 (was $IY, now $Y1)"
+echo "    moved:   x=$X1 y=$Y1 (delta +20,+7)"
+
+echo "==> 5/6 left button edge detection"
+qemu_hmp "mouse_button 1"
+S2=$(cursor_state)
+IB2=$(echo "$S2" | awk '{print $3}')
+[ "$IB2" = "L--" ] || fail "expected L--, got $IB2"
+
+qemu_hmp "mouse_button 0"
+S3=$(cursor_state)
+IB3=$(echo "$S3" | awk '{print $3}')
+[ "$IB3" = "---" ] || fail "expected --- after release, got $IB3"
+echo "    button:  $IB2 → $IB3"
+
+echo "==> 6/6 mouse stream routing to msgrecv's task"
+# The spawned task id shifts with the task table (wm-input took slot 3) —
+# parse it rather than hardcoding.
+sendkeys "msgrecv"
+sleep 1
+MID="$(sed -n 's/.*msgrecv: task \([0-9][0-9]*\) listening.*/\1/p' "$LOG" | tail -1)"
+[ -n "$MID" ] || fail "msgrecv did not spawn"
+echo "  msgrecv task id: $MID"
+sendkeys "mouse $MID"
+qemu_hmp "mouse_move 20 7"
+qemu_hmp "mouse_button 1"
+sleep 0.5
+qemu_hmp "mouse_button 0"
+sleep 0.5
+sendkeys "ctrl-c"
+sleep 0.5
+grep -aq "Mouse(+20,+7" "$LOG" || fail "routed mouse move not logged"
+
+echo ""
+echo "PASS — mouse round trip"
diff --git a/scripts/tests/test-msg.sh b/scripts/tests/test-msg.sh
new file mode 100755
index 0000000..7786beb
--- /dev/null
+++ b/scripts/tests/test-msg.sh
@@ -0,0 +1,98 @@
+#!/usr/bin/env bash
+#
+# scripts/tests/test-msg.sh — automated scheduler message-queue round trip.
+#
+# Tests all message types (user, timer, key, mouse), real-input routing,
+# and the queue-full boundary.
+#
+# Usage: ./scripts/tests/test-msg.sh
+# Env:   SYSTEM_IMG, OVMF, QEMU (see scripts/lib.sh)
+#
+set -euo pipefail
+TNAME="msg"
+# shellcheck source=../lib.sh
+source "$(dirname "$0")/../lib.sh"
+
+echo "==> 1/5 build (kernel + bins)"
+build_all
+
+echo "==> 2/5 stage system image"
+stage_image --force
+
+echo "==> 3/5 boot QEMU (headless)"
+test_boot
+
+echo "==> 4/5 drive the shell (msgrecv / send / mouse routing / queue-full)"
+# msgrecv's task id is assigned at spawn time and shifts when the task
+# table grows (the Windowed GUI added wm-input at slot 3) — read it from
+# the log instead of hardcoding.
+sendkeys "msgrecv"
+sleep 1
+MID="$(sed -n 's/.*msgrecv: task \([0-9][0-9]*\) listening.*/\1/p' "$LOG" | tail -1)"
+[ -n "$MID" ] || fail "msgrecv did not spawn (no 'msgrecv: task N listening' in the log)"
+echo "  msgrecv task id: $MID"
+
+sendkeys \
+	"send $MID user 42" \
+	"send $MID timer" \
+	"send $MID key enter" \
+	"send $MID key ctrl-c" \
+	"send $MID key f3" \
+	"send $MID mouse 5 -3 3" \
+	"sleep 800" \
+	"jobs"
+
+sendkeys "mouse $MID"
+qemu_hmp "mouse_move 20 7"
+qemu_hmp "mouse_button 1"
+qemu_hmp "mouse_move -5 -3"
+qemu_hmp "mouse_button 0"
+qemu_hmp "sendkey ctrl-c"
+
+# Queue-full probe: overflow a queue that nobody drains.  The shell used
+# to be that task, but its exec pump now consumes its own User messages
+# as completion codes (q=0 at the prompt), and msgrecv consumes on wake —
+# the cursor task never calls recv, so its 16-slot ring fills for real.
+CID="$(awk '$2 == "cursor" { print $1 }' "$LOG" | tail -1)"
+[ -n "$CID" ] || fail "no cursor task in jobs output (cannot probe queue-full)"
+echo "  queue-full target: task $CID (cursor, never recv'd)"
+
+sendkeys \
+	"send $CID user 1" \
+	"send $CID user 2" \
+	"send $CID user 3" \
+	"send $CID user 4" \
+	"send $CID user 5" \
+	"send $CID user 6" \
+	"send $CID user 7" \
+	"send $CID user 8" \
+	"send $CID user 9" \
+	"send $CID user 10" \
+	"send $CID user 11" \
+	"send $CID user 12" \
+	"send $CID user 13" \
+	"send $CID user 14" \
+	"send $CID user 15" \
+	"send $CID user 16" \
+	"send $CID user 17" \
+	"sleep 800" \
+	"jobs" \
+	"poweroff"
+
+echo "==> 5/5 wait for shutdown + verify"
+wait_qemu_exit 30 || fail "QEMU did not exit after poweroff"
+
+grep -aq "msgrecv: task $MID listening" "$LOG" || fail "msgrecv did not spawn"
+grep -aq "msgrecv\[$MID\]: User(42)" "$LOG" || fail "user message missing"
+grep -aq "msgrecv\[$MID\]: Timer" "$LOG" || fail "timer message missing"
+grep -aq "msgrecv\[$MID\]: Key(Enter)" "$LOG" || fail "key enter missing"
+grep -aq "msgrecv\[$MID\]: Key(Ctrl-c)" "$LOG" || fail "key ctrl-c missing"
+grep -aq "msgrecv\[$MID\]: Key(F3)" "$LOG" || fail "key f3 missing"
+grep -aq "msgrecv\[$MID\]: Mouse(+5,-3 L R)" "$LOG" || fail "synthesized mouse message missing"
+grep -aq "msgrecv\[$MID\]: Mouse(+20,+7" "$LOG" || fail "real mouse move 20,7 not routed to queue"
+grep -aq "msgrecv\[$MID\]: Mouse(-5,-3 L" "$LOG" || fail "held-button routed move missing"
+grep -aq "queue full" "$LOG" || fail "17th send did not report queue full"
+grep -aq "send: unknown type" "$LOG" && fail "a bad send slipped through (expected none)"
+
+echo ""
+echo "PASS — message queues OK"
-- 
cgit v1.2.3