| Commit message (Collapse) | Author | Age | Files | Lines |
|---|
| |
|
|
|
|
|
| |
build-bootloader.sh now uses 'git submodule update --init --remote' so
builds fetch and check out the newest rsboot main rather than reverting
to the superproject's gitlink commit. Bump the gitlink to 92367a8
(fix(rsboot): naming).
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The kernel used to inherit whatever GOP mode the firmware picked
(QEMU/OVMF gave 1280x800). Now every surface derives from a fixed
800x600 canvas:
- uefi: typed EfiGopQueryMode/SetMode/GetMode fn pointers in
GraphicsOutputProtocol (were raw *mut c_void, never called).
- gop::select_gop_mode: scan the mode list for an exact 800x600
(32-bit BGR/RGB only, the driver assumes 4 Bpp), SetMode it; fall
back to the smallest mode that fits the canvas, then to the
firmware's choice. SetMode may move both the mode info pointer and
the framebuffer base, so both are re-read after the switch. Boot
log: 'gop: mode 3 selected — 800x600 (was 1280x800)'.
- tests: relative assertions are resolution-agnostic; test-gfx and
test-mouse had a boot-log race (shell line prints before the cursor
task line) — now wait for the cursor line instead of grepping once.
All four suites pass at 800x600. 0 build warnings.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The first visible GUI surface: real rect primitives, a single
shadow→display push path, and an on-screen mouse cursor that can
never race the text surface.
gop:
- fill_rect + push_rect(x,y,w,h): every raster op rasterises into the
RAM shadow, then push_rect copies the rect to the display (write-only,
still never read) and composites the cursor on top. blit_glyph and
scroll shifts now route through it.
- cursor overlay: 12x16 pointer (const-fn built from column lists) drawn
white with a black offset outline; position in one AtomicU64 (x:high
32, y:low 32) — unpack masks the low word (a bare 'as usize' cast is
a no-op on 64-bit). The cursor never enters the shadow, so erasing is
just a shadow push of the old rect.
- cursor_redraw after scroll shifts and once at spawn (the vt diff never
re-blits idle cells).
cursor task (task 2, spawned at boot when a mouse is present):
- owns the PS/2 ring; polls every 10 ms, moves the cursor (clamped),
tracks buttons, and forwards every event to a task's queue when
'mouse <id>' armed it (the window-manager input path).
- /dev/mouse is now a position device (x/y/buttons snapshot); 'mouse'
watches the cursor live (prints on change); 'cursor' prints one-shot
state; 'gfx' draws a status-bar demo; 'gfx check' is an in-kernel
pixel self-test (shadow readback, display readback, cursor overlay
purity) — PASS/FAIL per stage.
Tests (headless QEMU + monitor injection):
- make test-gfx (new): all four compositor checks PASS.
- make test-mouse (rewritten): cursor tracks mouse_move deltas, buttons
ride along, /dev/mouse snapshot, live watch, real-event queue routing.
- make test-msg: task numbering shifted (cursor is task 2; msgrecv is
task 3) — updated, still PASS.
- make test-disk regression re-passes. 0 build warnings.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
Mouse (IRQ12, stream mode): ByteRing generalized for both PS/2 devices,
ISR routes data-port bytes by the controller's aux bit; mouse_init with
bounded-ACK handshake (boots without a mouse); packet decoder with
bit-3 resync, screen-relative deltas, buttons. Exposed as /dev/mouse,
the `mouse` stream command, and `make test-mouse`.
Message queues (ADR 0003's GUI-era primitive): every task gets a static
16-slot TaskMsg ring; send/recv/recv_blocking with direct wake + tick
scan safety net for the lost-wakeup race; `msgrecv`/`send` commands,
`mouse <id>` routes real IRQ12 events into a task's queue, jobs shows
q=. `make test-msg` + `make test-disk` regression pass.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
(fmtbuf/scripts/hexdump/cat/ahci/pci)
- memory.rs: self-test Layout::from_size_align no longer panics — the
test fails cleanly on an invalid layout
- fat.rs: v() no longer unwraps the active-volume slot — invariant
violation logs + halts instead of panicking mid-disk-io
- strbuf: shared FmtBuf replaces the duplicated PanicBuf/FmtBuf
(main.rs + sched.rs)
- test-disk.sh: SC2046 — conditional --fresh arg no longer relies on
word splitting
- scripts: boot.sh/boot-image.sh share lib-boot-args.sh (dup args loop)
- shell: cat/hexdump stdin pairs unified with Option<&str> marker;
hexdump format_row folded into format_partial
- ahci: read/write_sectors unified behind dma_sectors
- pci: config_read/write share config_addr
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Implement the shell experience redesign: one canonical grammar for every
command — 'cmd args [USE src] [TIL marker] [filters...] [output kw dst]'.
- Keyword redirection (uppercase-only, aliases valid, fully reserved):
WRITING/WRITE overwrite, TO append, USE/USING input source,
TIL/UNTIL heredoc/terminator (exact full-line marker). > >> < << are
removed; '>' is plain text.
- Post-filter stages applied left to right over a line stream, each
repeatable: -h N (head kills the upstream), -t N (tail holds a
rolling window, flushes at EOF/^C), -g PAT (smart-case literal
substring), -p (screenful pager, terminal only). A file sink
replaces the screen; -p is a no-op with one.
- C-style quoting: "..." groups and literalizes, \x escapes one char;
quoted/escaped text is never an operator, never split.
- Input consumers: cat/hexdump, path-less only (stdin until ^D,
USE f, TIL m heredoc, USE f TIL m truncation). Other commands
reject input keywords; paths + input keyword is a syntax error.
- ^D is EOF everywhere and never powers off; poweroff/exit are the
only shutdown verbs.
- help rewritten; test-disk.sh and sendkeys.py use the keyword syntax.
Verified in QEMU: 26 grammar checks on fresh and reused disks, disk
round trip, pager pacing, -h stopping /dev/mem at N lines, ^C flushing
a -t window. Two bugs found during verification and fixed:
1. WRITING over an existing file wrote after stale NUL padding —
fs::size() is stale after set_len(0); the sink writes at offset 0
after truncation.
2. USE f TIL m leaked the post-marker remainder — the final
partial-line emit ran after the marker break; guarded with a
stopped flag.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
- fat.rs: VOL: Option<Volume> → VOLS: Vec<Volume>; try_mount() returns
a Volume per disk and init() mounts every valid FAT32 volume found.
Volume UID = sanitized uppercase label + 8-hex volume serial
(e.g. RSDOS-5BD1E55F): unique per format, stable across reboots,
human-recognizable, machine-parseable (^[A-Z0-9_]+-[0-9A-F]{8}$);
cloned volumes get a -N suffix. Public ops take a vol index and
select it (select_vol also picks the backing AHCI disk), matching
the ahci::select pattern
- fs.rs: /disk is now a plain directory whose children are one Disk
node per mounted volume, named by UID; DiskInfo carries vol
- LFN fix: entries are stored last-first on disk — both the writer
(head-entry first) and reader (append in disk order) were reversed
and cancelled out for ≤13-char names; multi-entry names (>13 chars)
read back mangled (e.g. 'from-kernel.txt' as 'xt'). Writer now
places seq=1 closest to the SFN and seq=N|0x40 first; reader places
chunks by sequence number and trims at the first NUL. Verified with
a 25-char filename round trip: kernel ls/cat correct, mtools shows
the full LFN, fsck clean on both volumes
- test-disk.sh: test file renamed to disk-test-.txt (>13 chars,
exercises multi-entry LFN); UID discovered from the boot log; QEMU
stdio redirected to a log file + EXIT trap so an orphaned QEMU can
never hang a piped caller (it previously did, 400s)
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
- scripts/mkdisk.sh: create the FAT32 disk with mkfs.fat -C (the flag
that actually creates the file — plain mkfs.fat fails on a missing
path), accept M/G/K sizes, seed seed/ files via mtools; --fresh
re-formats, --no-seed skips seeding
- scripts/sendkeys.py: type lines into the guest via the QEMU monitor
(US layout). Punctuation must use QEMU's named keys (minus, slash,
dot, ...) — bare '-', '.', '/' are not valid sendkey names, and '-'
is the modifier separator, so they were silently dropped before
- scripts/test-disk.sh: full automated round trip — build, deploy,
ensure image, boot headless QEMU, drive the shell (ls /disk, mkdir,
echo >, cat, poweroff), then verify with fsck.fat (must be clean)
and mtype (file content must have survived poweroff)
- Makefile: make disk / disk-fresh / inspect / test-disk; run, run-gui
and debug now auto-create a missing DISK_IMG; fix the stale comment
(mkfs.fat without -C)
- scripts/boot.sh: auto-create a missing DISK_IMG via mkdisk.sh
- seed/: motd.txt + lines.txt seeded onto fresh images
- Verified end to end: ./scripts/test-disk.sh --fresh passes
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The kernel previously started only AHCI port 0, so any launch where the
firmware/QEMU put something else on port 0 (e.g. the ESP from an implicit
-drive file=fat:rw:esp) left the real disk unnoticed: 'unsupported sector
size 0' and no mount.
- ahci.rs: enumerate CAP.NP/PI ports, start every port that links up
(empty ports settle at DET=0 and are skipped quickly), keep up to 8
disks, and expose disk_count()/select() for the filesystem
- fat.rs: try each disk in port order and mount the first valid FAT32
volume; non-FAT disks are logged and skipped
- scripts/boot.sh: attach the data disk on ide.0 and the ESP on ide.1
(DISK_IMG env var, default /tmp/disk.img), matching the Makefile
- Verified with the disk on port 0 (Makefile style), port 5 (old-style
command line), and with the ESP on port 0; fsck.fat stays clean
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
- ahci.rs: polling AHCI on PCI class 1/6/1, bus mastering + ABAR map,
port 0 up, IDENTIFY + READ/WRITE DMA EXT through one 4KiB DMA buffer
- fat.rs: BPB parse, whole-FAT RAM cache with write-back to both copies,
LFN read/write, dirs, multi-cluster files, FSInfo free-count sync,
space-padded dot entries ('..' = cluster 0 under root), fsck-clean
- fs.rs: /disk mount node + 24-slot ephemeral node pool; ls/cat/hexdump/
echo/mkdir/touch/rm/edit all work on disk paths unchanged
- QEMU: explicit bus assignment (disk=ide.0, ESP=ide.1); the implicit
fat:rw:esp drive was stealing AHCI port 0
- Debugged against QEMU source: header DW0 is CFL in bits 4:0 / PRDTL in
bits 31:16 (Linux libahci layout), FIS count at bytes 12-13, device at
byte 7; QEMU rejects H2D FIS flags bits 6:4, so direction is the
header W bit only
- Verified: full shell round-trip on /disk, reboot persistence (poweroff
then mdir/mtype and a fresh boot), fsck.fat clean
|
| |
|
