| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
hardening
EHCI (OptiPlex 7010 / Q77 and similar Intel PCH):
- enumerate *both* EHCI controllers (00:1a.0 + 00:1d.0), not just the first
- hub support: read the hub class descriptor, power/reset each port via hub
class requests, read the child speed, then drive the child with split
transactions carrying the hub's address and port (TT). On 7-series PCH the
root port presents the integrated Rate Matching Hub (8087:0024, class 9)
and the mouse/keyboard sit behind it; without this the driver stopped at
"no HID mouse/keyboard endpoint in config".
- HID mouse *and* keyboard, boot protocol + idle, per-device periodic QH
chained into the frame list, per-device report buffers and counters
- periodic re-arm follows the standard shape (qTD re-activated, Next-qTD
re-linked); the HC owns the status/toggle overlay
- DMA from the page allocator inside [16 MiB, 4 GiB): EHCI programs 32-bit
addresses and the page bitmap spans all RAM
- 2 ms recovery after SET_ADDRESS
xHCI:
- scratchpad buffers (HCSPARAMS2) and MaxSlotsEn > 1, with per-slot EP0 and
interrupt rings plus per-slot device contexts
- DMA from the page allocator instead of the heap allocator
- boot protocol + idle, mouse + keyboard, first-report diagnostics
- transfer events are routed to every device before matching a waiter, so a
second device's enumeration cannot swallow an armed device's report
shared:
- rsnix/src/hid.rs: HID usage -> scancode-set-1 tables, one scancode FIFO
feeding ps2::feed_scancode, per-device boot-keyboard report differ
- WM input pump polls PS/2 -> UHCI -> EHCI -> xHCI
- memory::alloc_pages_range(count, min, max) for bounded DMA allocations
QEMU coverage: make test-usb (EHCI + xHCI, mouse + keyboard). QEMU's EHCI
split path delivers only the first report for FS devices, so repeated-report
delivery and the RMH path remain hardware-test items.
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
- Add polled EHCI (USB2) and UHCI (USB1.1) host-controller drivers with
HID boot mouse support, wired into cursor polling and the 'usb' shell cmd
- Add USB Legacy ownership handoff (claim_usb_legacy) plus config_write_byte
- Harden boot: verify the PIT/timer ticks before shell entry, EOI stray
interrupts in the LAPIC to stop interrupt storms, bound PS/2 controller
waits, and INTx-disable AHCI (polled driver)
- Add boot stage markers, klog screen echo, and QR lock; scheduler
mark_shell_running; NO_USB stopgap to keep BIOS USB-Legacy input alive
- alloc_pages_above for DMA buffers that must avoid low conventional memory
- Expand DEBUG_NOTES with EHCI/QEMU bring-up findings
|
