| Commit message (Collapse) | Author | Age | Files | Lines |
|---|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
- Add polled EHCI (USB2) and UHCI (USB1.1) host-controller drivers with
HID boot mouse support, wired into cursor polling and the 'usb' shell cmd
- Add USB Legacy ownership handoff (claim_usb_legacy) plus config_write_byte
- Harden boot: verify the PIT/timer ticks before shell entry, EOI stray
interrupts in the LAPIC to stop interrupt storms, bound PS/2 controller
waits, and INTx-disable AHCI (polled driver)
- Add boot stage markers, klog screen echo, and QR lock; scheduler
mark_shell_running; NO_USB stopgap to keep BIOS USB-Legacy input alive
- alloc_pages_above for DMA buffers that must avoid low conventional memory
- Expand DEBUG_NOTES with EHCI/QEMU bring-up findings
|
| |
|
|
|
|
|
|
|
|
|
|
| |
- klog: MAX_LINE 128 -> 512 (lens widened u8 -> u16) — long serial_println
lines (panics, boot messages) are no longer cut at 128 bytes; they
print in full and the terminal wraps them at the screen edge
- tty: LINE_BUF_SIZE 256 -> 1024 — typed command lines longer than 256
chars were silently dropped at the buffer limit; now they echo and
submit in full (the terminal already wraps the echo mid-typing)
- pager (-p): screenfuls now count wrapped rows, not lines — a line
wider than the terminal occupies ceil(len/cols) rows, so the pause
lands at a real screen boundary instead of overflowing it
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
176-byte frames
- sched: 16-slot static table, shell=task 0, idle=task 1, spawn with
guard page + 8 KiB stack, RR on the 100 Hz tick, int 0x60 yield,
sleep_ms, lazy reap, jobs/bg/sleep/kill shell commands
- gdt: own GDT mirroring UEFI selectors + TSS with IST1/IST2
(guard-page overflows die gracefully instead of triple-faulting)
- interrupts: isr_dispatch returns next frame in rax; IntFrame grows
rsp/ss fields — QEMU's 64-bit iretq always pops all five slots from
a 176-byte frame, so synthetic task frames must carry rsp=top+ss
(a 160-byte frame made the first iretq pop rsp/ss from the unmapped
page beyond the frame)
- panic handler: task panics abort the task, shell keeps running
- main: sched::init moved after page allocator + adopted tables
(the idle's stack+guard need both; it was silently not spawning)
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
- interrupts::uptime_ms(): monotonic ms since boot — the 100 Hz PIT
tick (10 ms) plus interpolation from the PIT's live 1.19 MHz
down-counter (read twice around the tick load; a count jump means a
tick fired between reads) for true sub-ms resolution. TICKS widened
AtomicU16 -> AtomicU64 (u16 wrapped after ~11 min).
- PIT_READY gates interpolation until interrupts::init configures the
timer, so early-boot lines are deterministically [0000.000] instead
of uninitialised-PIT noise; klog clamps timestamps monotonic.
- The CMOS RTC cannot provide milliseconds (1 Hz BCD device, seconds
only) — millis come from the PIT.
- klog stores ms per line at append time; dump format is now
'[0000.123] 000000 === rsnix boot ===' (user-specified format).
Verified in QEMU: first line [0000.000], Phase-2 lines show real
monotonic ms (fs: vfs ready at [0000.519], self-test [0000.524]),
per-dump monotonicity, boot.log persists timestamps, test-disk round
trip fsck-clean.
|
|
|
- rsnix/src/klog.rs: RAM ring of the last 128 serial log lines (128
chars each), fed by serial_println! so every boot/low-level message
is captured for free. Sequence numbers per line, wrap/drop
accounting; the ring never allocates (const-constructible static).
- /dev/klog char device; shell 'klog' is a thin alias for cat
/dev/klog with the same filters/redirection, so 'klog -t 5',
'klog -g fat' and 'klog WRITING /disk/.../boot.log' all work.
klog rejects positional args (usage) and input keywords.
- Shell user-facing output (banner, prompt, term_print/term_println,
pipeline sink, halt/poweroff) now writes to serial directly instead
of through serial_println!, keeping echo/cat output out of the boot
log (a streaming cat /dev/mem would otherwise wrap the ring).
- serial_println! macro hooks klog::append_fmt via format_args! (no
alloc at call sites); klog::dump formats the log for the device.
Verified in QEMU: 28 boot lines captured (seq 0..27), shell output
absent from the ring, klog WRITING persists a boot log (mtype-checked),
wrap verified with a temporary 140-line boot loop (128 kept / 40
dropped, seq 40..167, oldest-live correct; loop reverted); full
test-disk round trip still fsck-clean.
|
