| Commit message (Collapse) | Author | Age | Files | Lines |
|---|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
- interrupts::uptime_ms(): monotonic ms since boot — the 100 Hz PIT
tick (10 ms) plus interpolation from the PIT's live 1.19 MHz
down-counter (read twice around the tick load; a count jump means a
tick fired between reads) for true sub-ms resolution. TICKS widened
AtomicU16 -> AtomicU64 (u16 wrapped after ~11 min).
- PIT_READY gates interpolation until interrupts::init configures the
timer, so early-boot lines are deterministically [0000.000] instead
of uninitialised-PIT noise; klog clamps timestamps monotonic.
- The CMOS RTC cannot provide milliseconds (1 Hz BCD device, seconds
only) — millis come from the PIT.
- klog stores ms per line at append time; dump format is now
'[0000.123] 000000 === rsnix boot ===' (user-specified format).
Verified in QEMU: first line [0000.000], Phase-2 lines show real
monotonic ms (fs: vfs ready at [0000.519], self-test [0000.524]),
per-dump monotonicity, boot.log persists timestamps, test-disk round
trip fsck-clean.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
- rsnix/src/klog.rs: RAM ring of the last 128 serial log lines (128
chars each), fed by serial_println! so every boot/low-level message
is captured for free. Sequence numbers per line, wrap/drop
accounting; the ring never allocates (const-constructible static).
- /dev/klog char device; shell 'klog' is a thin alias for cat
/dev/klog with the same filters/redirection, so 'klog -t 5',
'klog -g fat' and 'klog WRITING /disk/.../boot.log' all work.
klog rejects positional args (usage) and input keywords.
- Shell user-facing output (banner, prompt, term_print/term_println,
pipeline sink, halt/poweroff) now writes to serial directly instead
of through serial_println!, keeping echo/cat output out of the boot
log (a streaming cat /dev/mem would otherwise wrap the ring).
- serial_println! macro hooks klog::append_fmt via format_args! (no
alloc at call sites); klog::dump formats the log for the device.
Verified in QEMU: 28 boot lines captured (seq 0..27), shell output
absent from the ring, klog WRITING persists a boot log (mtype-checked),
wrap verified with a temporary 140-line boot loop (128 kept / 40
dropped, seq 40..167, oldest-live correct; loop reverted); full
test-disk round trip still fsck-clean.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
- `cat/hexdump <path> TIL <marker>` is now sugar for `USE <path> TIL
<marker>`: the paths are the input source, truncated at the first
marker line across the combined stream. Path args + USE stays a
syntax error (two input sources), now with a message that says so.
- The parser's `trailing` flag conflated filters with the output
keyword, so `cat f TO out TIL m` blamed the filters. USE/TIL now
distinguish "before the filters" from "before the output keyword",
and filters after the output keyword (`TO out -h 2`) are now
rejected instead of silently accepted.
- cat_file_until/hexdump_file_until return a tri-state (Done/Marker/
Aborted) so multi-path TIL truncation stops at the first marker.
Verified in QEMU (10 checks): truncation, combined-stream marker,
filters after the sugar, heredoc round trip, all four ordering-error
messages, USE-with-paths ambiguity, fsck clean.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Implement the shell experience redesign: one canonical grammar for every
command — 'cmd args [USE src] [TIL marker] [filters...] [output kw dst]'.
- Keyword redirection (uppercase-only, aliases valid, fully reserved):
WRITING/WRITE overwrite, TO append, USE/USING input source,
TIL/UNTIL heredoc/terminator (exact full-line marker). > >> < << are
removed; '>' is plain text.
- Post-filter stages applied left to right over a line stream, each
repeatable: -h N (head kills the upstream), -t N (tail holds a
rolling window, flushes at EOF/^C), -g PAT (smart-case literal
substring), -p (screenful pager, terminal only). A file sink
replaces the screen; -p is a no-op with one.
- C-style quoting: "..." groups and literalizes, \x escapes one char;
quoted/escaped text is never an operator, never split.
- Input consumers: cat/hexdump, path-less only (stdin until ^D,
USE f, TIL m heredoc, USE f TIL m truncation). Other commands
reject input keywords; paths + input keyword is a syntax error.
- ^D is EOF everywhere and never powers off; poweroff/exit are the
only shutdown verbs.
- help rewritten; test-disk.sh and sendkeys.py use the keyword syntax.
Verified in QEMU: 26 grammar checks on fresh and reused disks, disk
round trip, pager pacing, -h stopping /dev/mem at N lines, ^C flushing
a -t window. Two bugs found during verification and fixed:
1. WRITING over an existing file wrote after stale NUL padding —
fs::size() is stale after set_len(0); the sink writes at offset 0
after truncation.
2. USE f TIL m leaked the post-marker remainder — the final
partial-line emit ran after the marker break; guarded with a
stopped flag.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
- edition = "2024" in the workspace manifest and rsdosedit
- extern blocks must be unsafe: interrupts.rs ISR stubs -> unsafe extern "C"
- #[no_mangle] -> #[unsafe(no_mangle)] (efi_main, isr_dispatch)
- One missed static-mut read in free_list_insert wrapped in an explicit
unsafe block (edition 2024 removed the implicit unsafe context inside
unsafe fns)
- rustfmt reflows for 2024: nested if-lets become let-chains, imports
re-sorted, rsdosedit help-screen box rows wrapped
No codegen-affecting changes. Validated: cargo check/clippy/fmt clean
(host + uefi target), make test-disk PASS, editor round-trip PASS.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Warning cleanup (cargo check + clippy now 0 across the workspace):
- Migrate all 21 static_mut_refs sites to &raw mut accessors (fat, gop,
ps2, vt, ahci, interrupts, memory) so edition 2024 won't deny them
- panic = "abort" profiles: bare cargo check/build now works without
nightly/-Zbuild-std
- Wire TICKS in the timer ISR (it was never incremented, so the vt scroll
batching trigger was dead code)
- Clippy: efi_main becomes unsafe extern "efiapi" with a # Safety doc,
KeyBuf::new uses inline-const array repeat (no interior-mutable const),
editor main loop is a while-let, PIT control byte regrouped
- [workspace.lints.clippy] allows result_unit_err + needless_range_loop
(deliberate kernel style); large_enum_variant allowed on LineInput
- Drop now-stale static_mut_refs allow from the rsdos bin
FAT32 correctness fixes (both pre-existing, exposed by the SFN fix):
- Unique 8.3 short names: to_8_3() never disambiguated collisions, so
files sharing a long-name prefix got identical SFNs and fsck reported
duplicate directory entries. Add dir_short_names() + unique_short_name()
(~N tails, Windows-style) and force LFN when the SFN changes.
- Multi-cluster directories: scan_dir/dir_short_names stopped at the first
0x00 slot, hiding every entry written into a chained cluster (writes
failed with 'cannot write', duplicate SFNs accumulated); add_dir_entry
now packs the cluster (0xE5 deleted-markers) before extending so other
FAT readers (mtools, Windows) see the continuation too.
Other: delete dead fields (Disk.fis, Volume.fat_count), drop timer_irq/
keyboard_irq/rendered, refresh_and_exit is a documented unsafe fn, CONTEXT
.md corrected (stable toolchain, IRQ input, 4-crate layout), .gitignore
excludes .pi-subagents artifacts.
Validated: cargo check/clippy/fmt clean, make test-disk PASS on fresh and
reused images (incl. two directory-chain extensions and ~10 SFN tails),
editor round-trip smoke test PASS.
|
| | |
|
| | |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
- fat.rs: VOL: Option<Volume> → VOLS: Vec<Volume>; try_mount() returns
a Volume per disk and init() mounts every valid FAT32 volume found.
Volume UID = sanitized uppercase label + 8-hex volume serial
(e.g. RSDOS-5BD1E55F): unique per format, stable across reboots,
human-recognizable, machine-parseable (^[A-Z0-9_]+-[0-9A-F]{8}$);
cloned volumes get a -N suffix. Public ops take a vol index and
select it (select_vol also picks the backing AHCI disk), matching
the ahci::select pattern
- fs.rs: /disk is now a plain directory whose children are one Disk
node per mounted volume, named by UID; DiskInfo carries vol
- LFN fix: entries are stored last-first on disk — both the writer
(head-entry first) and reader (append in disk order) were reversed
and cancelled out for ≤13-char names; multi-entry names (>13 chars)
read back mangled (e.g. 'from-kernel.txt' as 'xt'). Writer now
places seq=1 closest to the SFN and seq=N|0x40 first; reader places
chunks by sequence number and trims at the first NUL. Verified with
a 25-char filename round trip: kernel ls/cat correct, mtools shows
the full LFN, fsck clean on both volumes
- test-disk.sh: test file renamed to disk-test-.txt (>13 chars,
exercises multi-entry LFN); UID discovered from the boot log; QEMU
stdio redirected to a log file + EXIT trap so an orphaned QEMU can
never hang a piped caller (it previously did, 400s)
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
- scripts/mkdisk.sh: create the FAT32 disk with mkfs.fat -C (the flag
that actually creates the file — plain mkfs.fat fails on a missing
path), accept M/G/K sizes, seed seed/ files via mtools; --fresh
re-formats, --no-seed skips seeding
- scripts/sendkeys.py: type lines into the guest via the QEMU monitor
(US layout). Punctuation must use QEMU's named keys (minus, slash,
dot, ...) — bare '-', '.', '/' are not valid sendkey names, and '-'
is the modifier separator, so they were silently dropped before
- scripts/test-disk.sh: full automated round trip — build, deploy,
ensure image, boot headless QEMU, drive the shell (ls /disk, mkdir,
echo >, cat, poweroff), then verify with fsck.fat (must be clean)
and mtype (file content must have survived poweroff)
- Makefile: make disk / disk-fresh / inspect / test-disk; run, run-gui
and debug now auto-create a missing DISK_IMG; fix the stale comment
(mkfs.fat without -C)
- scripts/boot.sh: auto-create a missing DISK_IMG via mkdisk.sh
- seed/: motd.txt + lines.txt seeded onto fresh images
- Verified end to end: ./scripts/test-disk.sh --fresh passes
|
| |
|
|
|
|
|
|
|
|
|
|
| |
A CD-ROM (or any ATAPI device) on a scanned port previously made the
driver spin the full 100M-iteration timeout on IDENTIFY, then log a
scary 'timed out' (QEMU leaves ATAPI aborts pending in PxCI instead of
completing the slot; tfd=0x441 = ABRT).
- skip a port up-front when firmware set PxCMD.ATAPI (bit 24)
- bail out of the completion poll as soon as PxTFD.ERR is set, clear
the error bits and any wedged slot, and report the abort instead of
timing out — the port scan stays fast with a CD attached
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The kernel previously started only AHCI port 0, so any launch where the
firmware/QEMU put something else on port 0 (e.g. the ESP from an implicit
-drive file=fat:rw:esp) left the real disk unnoticed: 'unsupported sector
size 0' and no mount.
- ahci.rs: enumerate CAP.NP/PI ports, start every port that links up
(empty ports settle at DET=0 and are skipped quickly), keep up to 8
disks, and expose disk_count()/select() for the filesystem
- fat.rs: try each disk in port order and mount the first valid FAT32
volume; non-FAT disks are logged and skipped
- scripts/boot.sh: attach the data disk on ide.0 and the ESP on ide.1
(DISK_IMG env var, default /tmp/disk.img), matching the Makefile
- Verified with the disk on port 0 (Makefile style), port 5 (old-style
command line), and with the ESP on port 0; fsck.fat stays clean
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
- ahci.rs: polling AHCI on PCI class 1/6/1, bus mastering + ABAR map,
port 0 up, IDENTIFY + READ/WRITE DMA EXT through one 4KiB DMA buffer
- fat.rs: BPB parse, whole-FAT RAM cache with write-back to both copies,
LFN read/write, dirs, multi-cluster files, FSInfo free-count sync,
space-padded dot entries ('..' = cluster 0 under root), fsck-clean
- fs.rs: /disk mount node + 24-slot ephemeral node pool; ls/cat/hexdump/
echo/mkdir/touch/rm/edit all work on disk paths unchanged
- QEMU: explicit bus assignment (disk=ide.0, ESP=ide.1); the implicit
fat:rw:esp drive was stealing AHCI port 0
- Debugged against QEMU source: header DW0 is CFL in bits 4:0 / PRDTL in
bits 31:16 (Linux libahci layout), FIS count at bytes 12-13, device at
byte 7; QEMU rejects H2D FIS flags bits 6:4, so direction is the
header W bit only
- Verified: full shell round-trip on /disk, reboot persistence (poweroff
then mdir/mtype and a fresh boot), fsck.fat clean
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Streaming output scrolled one framebuffer push per line (each a
~3-8 MB write-only copy). The vt now scrolls the logical grid
instantly in RAM and defers the display shift: N pending scrolls are
pushed together as one shift_up_n — one push regardless of batch size.
- vt: PENDING_SCROLLS counter; scroll_up shifts CELLS only; flush
renders nothing while pending (the diff would otherwise re-rasterise
the whole screen per line); sync_scroll() does one gop::shift_up_n +
RENDERED mirror + normal diff flush (which re-blits just the newly
exposed rows and the cursor).
- Sync triggers: batch of 16 rows, ~40 ms of stream pause (100 Hz
TICKS), any CSI sequence (full-screen apps like the editor render
immediately), clear_all/set_cursor_visible, interactive input
(tty read_line/read_byte), and the shell before each prompt.
- gop: shift_up → shift_up_n(n) (one shadow memcpy + one push).
Verified in QEMU: mmap/hexdump streaming renders in coherent batches
with the prompt syncing at the end; clear wipes clean; the editor
scrolls and redraws immediately (45-line file, gutter + status bar
intact, cursor correct); save/exit/cat round-trip unchanged. Release
and dev builds pass.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Real-hardware GOP framebuffers are typically uncacheable or
write-combining (firmware MTRR/PAT), so the scroll shift's full-screen
memcpy *read* ~4-8 MB through uncached memory — a bus round-trip per
cache line. That made scroll printing crawl on real hardware while
plain printing (a few glyph writes) stayed instant.
- gop keeps a RAM shadow copy of the whole framebuffer (same pitch
layout), allocated at init.
- Every raster write (glyph blits, clear) goes to both the display and
the shadow.
- shift_up becomes: cached shadow memcpy up one row + clear exposed
bottom row in the shadow + one write-only push shadow→display via
copy_nonoverlapping (64-byte bursts that coalesce on WC memory) —
the display is never read.
- Fallback to the old direct shift if the shadow allocation is null.
Verified in QEMU: mmap output scrolls ~100 lines with coherent rows
and a clean bottom row, clear wipes the screen, cursor tracks the
prompt, editor paths untouched. Release + dev builds pass.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The cursor was blitted as an inverse-video cell directly onto the
framebuffer, but that inversion was never recorded. RENDERED (the
diff grid) only stored the logical cell, so when scrolling shifted the
raw pixels up (gop::shift_up), the stale inverse block rode along
while the grids said 'blank' — and blank-vs-blank never re-blits.
Result: a cursor-shaped block at the end of every scrolled line,
surviving even 'clear'.
- flush() now mirrors the inverse colours into RENDERED when drawing
the cursor (and restores RENDERED when erasing it), and the diff
loop skips the visible cursor cell (owned by the cursor pass).
Any scroll/clear then sees CELLS != RENDERED at a stale-inverse
position and repaints it.
- memory.rs heap self-test: snapshot heap state before its own
allocations and assert the heap returns to that state, instead of
asserting it coalesces to a single empty block. The vt cell grids
(allocated earlier in boot) made the old 'free_blocks == 1' check
fail; the new check is correct regardless of prior live allocations.
Verified in QEMU: hexdump /dev/mem streams hundreds of lines, ^C,
screendump shows exactly one inverse cell (the live cursor); 'clear'
leaves exactly one (the fresh prompt cursor). heap self-test OK again.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The editor's gutter '│' (U+2502) appeared as '???' — write_bytes fed
each UTF-8 byte to the state machine, which mapped every byte >= 0x80
to '?', and the Latin-1 font has no box-drawing glyphs anyway.
- vt.write_bytes now decodes UTF-8 sequences; printable non-ASCII
dispatches to the glyph path instead of the byte parser.
- gop: unicode_glyph_bits() procedurally rasterises box-drawing
(U+2500-257F light/heavy/double), arrows (U+2190-2193) and the em
dash (U+2014) — pure geometry, no font data needed; blit_glyph falls
back to it for ch >= 256.
Verified via framebuffer dumps: editor gutter │ renders as a vertical
line, help screen ═ separators and ←→↑↓ all render as lines (no '?').
Shell banner em dash renders too.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Kernel now has the classic UNIX console split, so full-screen ANSI apps
can run in ring 0:
- vt.rs: terminal emulator owning the text screen — cell grid (char +
fg/bg), logical cursor (inverse-video), scrolling, and a small ANSI
CSI parser (cursor position H/f, erase J/K, moves A-D, SGR 16-colour
with correct ANSI→VGA mapping, cursor show/hide ?25). Blits only
changed cells; scroll shifts cell grids + pixels and re-rasterises
only the exposed bottom row. gop_println!/clear_screen now render
through the vt; gop.rs is the raw rasteriser (colored glyph blits,
pixel shift).
- tty.rs: line discipline — canonical read_line (echo, line buffer,
^C cancel, ^D EOF) moved out of the shell, and raw read_byte that
translates KeyEvents to the terminal byte protocol (arrows → ESC[A-D,
Backspace → 0x7f, ^X → 0x18, Ctrl+arrows → ESC[1;5A-D, Home/End/PgUp/
PgDn/Delete). interrupt_pressed() stays for streaming commands.
- ps2: generic Ctrl(char) + CtrlArrow events (was: only CtrlC/CtrlD).
- rsdosedit: no_std port of the RNG rsedit editor as the first real
app — undo, syntax highlighting (verified green/gray/yellow on the
framebuffer), search, word nav, smart indent, ^S save / ^X exit /
^X again to discard. termios → tty raw, stdout → vt, std::fs → VFS
(ramfs), SIGWINCH → fixed geometry, force-exit window → key counter.
- shell: 'edit <path>' command; read_line/strbuf moved to rsnix.
- CONTEXT.md: layout + milestones + known-issue perf notes.
Verified in QEMU: full edit → type → arrow-move → insert → save → exit
round trip with byte-exact file content; ANSI colors via screendump.
|
| |
|
|
|
|
|
|
|
|
|
|
| |
- ps2: Ctrl+C and Ctrl+D are now KeyEvents (ctrl modifier + c/d map);
other Ctrl+key combos are swallowed
- shell read_line: ^C clears the line and echoes '^C' (bash-style),
^D on an empty line echoes '^D' and shuts down (EOF), ^D with text
on the line is ignored
- cat/hexdump stream incrementally (was: build whole string then print)
and check for ^C between chunks, so a running dump can be aborted
- verified in QEMU: line cancel, standalone interrupt, ^C aborts an
infinite 'cat /dev/zero' stream, ^D powers off
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
- fs.rs: node-table VFS (root /dev /tmp /etc). Regular files are
in-memory ramfs; char devices regenerate content on every read so
'cat /dev/rtc' shows the live time. Nodes are stable handles with
tombstone removal; . and .. path resolution.
- /dev devices: mem (raw physical RAM, offset = address), rtc, pci,
version, meminfo, null, zero, console (write prints to screen+serial),
serial. /etc/motd static file.
- shell: ls, cat, hexdump (hexdump -C style), mkdir, touch, rm; echo
gains '>' overwrite and '>>' append redirection (append bug fixed:
first '>' in '>>' was parsed as overwrite)
- boot: fs init + self-test (create/read/write/remove) before the shell
- QEMU verified: file lifecycle, redirection, console/null writes,
mkdir/touch/rm, hexdump /dev/mem and /tmp/x byte-exact
|
| |
|
|
|
|
|
|
|
|
| |
- rtc.rs: read the PC RTC via CMOS ports 0x70/0x71 (UIP wait, BCD/12h
normalization, century sanity-check with 2000+ fallback); boot prints
the wall clock, shell gains 'date'
- pci.rs: legacy config-space access (0xCF8/0xCFC) with full enumeration
of buses 0-255; boot reports device count, shell gains 'pci' (lspci
style listing with class names)
- QEMU q35 verified: Q35 host bridge, stdvga, e1000, ICH9 LPC
|
| | |
|
| | |
|
| |
|
|
|
|
|
|
|
|
|
| |
- uefi.rs: full EFI_RUNTIME_SERVICES layout with reset_system at index 10
(spec order); EfiResetSystem type + RESET_* constants
- power.rs: stash the runtime-services table pre-EBS; poweroff() calls
ResetSystem(EfiResetShutdown) — still callable after ExitBootServices
because we never call SetVirtualAddressMap, so the pointers keep
working with physical addresses; falls back to the hlt loop
- shell: 'poweroff' and 'exit' shut the machine down (QEMU exits),
'halt' keeps the plain hlt loop
|
| |
|
|
|
|
|
|
| |
- paging strategy: adopt_tables() rebuilds the firmware map into the
kernel's own tables (UEFI maps its tables read-only) and switches CR3
- physical memory: heap grows into the page allocator on demand
- milestones: paging helpers, heap growth, mmap/stress commands
- project layout: paging.rs entry
|
| |
|
|
|
|
|
|
|
|
|
| |
- cmd_mem: correct type grouping — 1|2 loader, 5|6 runtime (new line),
9|10 ACPI, 7 conventional, 11|12 MMIO (previously 6 was mislabeled
LoaderData and 5|10 were called ACPI)
- cmd_mmap: per-region dump using uefi::memory_type_name with
index/type/start/pages/size columns
- cmd_stress <chunks(1-64)> <kb>: allocate chunk Vecs via
try_reserve_exact, report heap+page stats while held and after free;
exercises heap growth past the base region
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
- uefi.rs: full EfiMemoryType constants (0-14) + memory_type_name(); fix
MEMORY_TYPE_LOADER_DATA from 6 to 2 per the UEFI spec
- memory.rs: replace the bump allocator with a first-fit free-list heap
(splitting, coalescing, 8-byte back-pointer for alignment-safe free);
add a bitmap physical page allocator (heap region reserved, page-0
guard, aligned runs); grow the heap from the page allocator on demand
- paging.rs: identity page-table helpers — adopt_tables() rebuilds the
firmware map into our own tables (OVMF maps its tables read-only, so
the firmware tree can't be modified in place) and switches CR3;
map_page/unmap_page/is_mapped with 2 MB/1 GB large-page splitting
- main.rs: boot self-tests for heap, pages, and paging
|
| |
|
|
|
| |
Submodule rsboot ee1c85b — reclaimable loader scratch instead of
permanent runtime-services memory.
|
| | |
|
| |
|
|
|
|
|
|
|
|
|
|
| |
Architecture:
rs-dos/ (workspace root, was raisernics/)
├── rsnix/ — kernel lib crate (uefi, serial, gop, ps2, interrupts, memory)
├── shell/ — shell lib crate (prompt, commands, line input)
├── rsdos/ — binary crate (efi_main, init, panic handler)
└── rsboot/ — future git submodule
No functional changes — boots to shell prompt identically.
Version auto-pulled from Cargo.toml via env!("CARGO_PKG_VERSION").
|
| | |
|
| |
|
|
|
|
| |
Interrupts are functional: PIT timer (~100 Hz), PS/2 keyboard IRQ
with lock-free SPSC ring buffer, PIC remapped, IDT with 64-bit
interrupt gates. Kernel runs cleanly with no exceptions.
|
| |
|
|
|
|
|
|
|
|
|
|
| |
Root cause: x86_64-unknown-uefi uses the Microsoft x64 calling
convention where the first argument is passed in rcx, not rdi.
The ISR stub was setting rdi = rsp, but isr_dispatch() read
the frame pointer from rcx, getting garbage → triple fault.
Also:
- Enable PS/2 keyboard IRQ via controller config byte (bit 0).
- Expose read_scancode() and TICKS from interrupt module.
- ps2::poll_key() uses 'sti; hlt' race-free sleep pattern.
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
- IDT with 256 entries, loaded via lidt (CS read from current context)
- PIC 8259A remapped to vectors 32-47, timer+keyboard IRQs unmasked
- PIT channel 0 at ~100 Hz (mode 2, rate generator)
- PS/2 keyboard IRQ (IRQ1 → vector 33): reads port 0x60, pushes byte
to lock-free SPSC ring buffer
- Timer IRQ (IRQ0 → vector 32): sends EOI, increments tick counter
- ps2::poll_key() now reads from ring buffer with cli/sti+hlt for
race-free sleep (instead of busy-polling the data port)
- build.rs: use idiomatic Result<_, Box<dyn Error>> return type
- tools/qemu.sh: fix SC2207 shellcheck warning
|
|
|
- Bare-metal x86_64 UEFI kernel (PE32+, no libc)
- GOP framebuffer + 8x16 bitmap font
- PS/2 keyboard (polling, scancode set 1)
- UART 16550 serial driver (COM1, 115200 8N1)
- Bump allocator as #[global_allocator] (alloc::String, Vec, format!)
- UEFI memory map capture (static buffer, ADR 0001)
- Shell with 7 commands (help, echo, clear, hello, info, mem, halt)
- Dual output: GOP framebuffer + serial console
- Makefile: run, run-gui, debug, release, image targets
- tools/: qemu.sh, boot-image.sh, debug-kernel.py
|
