rs-dos/rsnix/src/cursor.rs, branch qemu

Windowed GUI: wm module, input routing, and the paint app

2026-08-17T16:56:04Z

- Add the wm window-manager facility per ADR 0004: overlapping pixel-surface windows, damage-rectangle compositing, WM-drawn title bar, focus/minimize/close, and F1-F4 keybindings - Add gop shadow compositing primitives and vt::repaint_region so the console stays layer 0 beneath windows - Route mouse (absolute coords, press/release edges) and keyboard (focus-aware input pump) to the focused window - Add the rspaint drawing-program crate (pen, 8 colors, clear) and shell draw/windows/restore commands - Extend TaskMsg with AppMouse/Focus/Close and document the design in CONTEXT.md + ADR 0004

USB2/1.1 (EHCI/UHCI) drivers + real-hardware bring-up hardening

2026-08-17T12:53:52Z

- Add polled EHCI (USB2) and UHCI (USB1.1) host-controller drivers with HID boot mouse support, wired into cursor polling and the 'usb' shell cmd - Add USB Legacy ownership handoff (claim_usb_legacy) plus config_write_byte - Harden boot: verify the PIT/timer ticks before shell entry, EOI stray interrupts in the LAPIC to stop interrupt storms, bound PS/2 controller waits, and INTx-disable AHCI (polled driver) - Add boot stage markers, klog screen echo, and QR lock; scheduler mark_shell_running; NO_USB stopgap to keep BIOS USB-Legacy input alive - alloc_pages_above for DMA buffers that must avoid low conventional memory - Expand DEBUG_NOTES with EHCI/QEMU bring-up findings

v0.5.10: USB HID mouse via polled xHCI (rsnix/src/usb.rs)

2026-08-04T01:06:06Z

Polled xHCI driver (mouse-only): controller bring-up, port reset, enable-slot -> address-device -> config-descriptor walk -> HID boot mouse IN endpoint, one outstanding IN TRB drained on poll. Cursor task polls usb first, PS/2 second. New 'usb'/'usb rescan' shell cmds. Verified in QEMU (q35 + OVMF + qemu-xhci + usb-mouse): movement and all three buttons tracked exactly; heap stays clean. Fixes en route: MaxPorts=HCSPARAMS1[31:24]; operational regs CRCR=0x18 DCBAAP=0x30 CONFIG=0x38; pass input-context ptr in Address-Device; Input Control Context DW0=Drop DW1=Add; HID walker bInterfaceClass at +5; async discovery from cursor task.

rsnix v0.5.0: graphics layer + cursor compositor

2026-08-01T17:52:05Z

The first visible GUI surface: real rect primitives, a single shadow→display push path, and an on-screen mouse cursor that can never race the text surface. gop: - fill_rect + push_rect(x,y,w,h): every raster op rasterises into the RAM shadow, then push_rect copies the rect to the display (write-only, still never read) and composites the cursor on top. blit_glyph and scroll shifts now route through it. - cursor overlay: 12x16 pointer (const-fn built from column lists) drawn white with a black offset outline; position in one AtomicU64 (x:high 32, y:low 32) — unpack masks the low word (a bare 'as usize' cast is a no-op on 64-bit). The cursor never enters the shadow, so erasing is just a shadow push of the old rect. - cursor_redraw after scroll shifts and once at spawn (the vt diff never re-blits idle cells). cursor task (task 2, spawned at boot when a mouse is present): - owns the PS/2 ring; polls every 10 ms, moves the cursor (clamped), tracks buttons, and forwards every event to a task's queue when 'mouse ' armed it (the window-manager input path). - /dev/mouse is now a position device (x/y/buttons snapshot); 'mouse' watches the cursor live (prints on change); 'cursor' prints one-shot state; 'gfx' draws a status-bar demo; 'gfx check' is an in-kernel pixel self-test (shadow readback, display readback, cursor overlay purity) — PASS/FAIL per stage. Tests (headless QEMU + monitor injection): - make test-gfx (new): all four compositor checks PASS. - make test-mouse (rewritten): cursor tracks mouse_move deltas, buttons ride along, /dev/mouse snapshot, live watch, real-event queue routing. - make test-msg: task numbering shifted (cursor is task 2; msgrecv is task 3) — updated, still PASS. - make test-disk regression re-passes. 0 build warnings.